Kernel
Kernel version:
uname -a Linux localhost.localdomain 4.18.16-300.fc29.x86_64 #1 SMP Sat Oct 20 23:24:08 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
Dmesg:
[root@localhost myuser]# dmesg
[ 0.000000] Linux version 4.18.16-300.fc29.x86_64 (mockbuild@bkernel04.phx2.fedoraproject.org) (gcc version 8.2.1 20180801 (Red Hat 8.2.1-2) (GCC)) #1 SMP Sat Oct 20 23:24:08 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.18.16-300.fc29.x86_64 root=/dev/mapper/fedora-root ro resume=/dev/mapper/fedora-swap rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=en_US.UTF-8
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009deffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009df0000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x0000000076a48fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000076a49000-0x0000000077f8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000077f90000-0x0000000077fb9fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000077fba000-0x000000007847ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000078480000-0x0000000079809fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007980a000-0x000000007bffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007c000000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b7a00000-0x00000000b7a00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b7b00000-0x00000000b7b7ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ef800000-0x00000000ef8fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000efc00000-0x00000000efc00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000efd00000-0x00000000efd7ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc0000-0x00000000fedc0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087f2fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000087f300000-0x000000087fffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x4bd94018-0x4bda5057] usable ==> usable
[ 0.000000] e820: update [mem 0x4bd94018-0x4bda5057] usable ==> usable
[ 0.000000] e820: update [mem 0x4bd74018-0x4bd93a57] usable ==> usable
[ 0.000000] e820: update [mem 0x4bd74018-0x4bd93a57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009deffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000009df0000-0x0000000009ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000affffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000b020000-0x000000004bd74017] usable
[ 0.000000] reserve setup_data: [mem 0x000000004bd74018-0x000000004bd93a57] usable
[ 0.000000] reserve setup_data: [mem 0x000000004bd93a58-0x000000004bd94017] usable
[ 0.000000] reserve setup_data: [mem 0x000000004bd94018-0x000000004bda5057] usable
[ 0.000000] reserve setup_data: [mem 0x000000004bda5058-0x0000000076a48fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000076a49000-0x0000000077f8ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000077f90000-0x0000000077fb9fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x0000000077fba000-0x000000007847ffff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000078480000-0x0000000079809fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007980a000-0x000000007bffffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007c000000-0x000000007fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000b7a00000-0x00000000b7a00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000b7b00000-0x00000000b7b7ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ef800000-0x00000000ef8fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000efc00000-0x00000000efc00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000efd00000-0x00000000efd7ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fea00000-0x00000000feafffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fedc0000-0x00000000fedc0fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000087f2fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000087f300000-0x000000087fffffff] reserved
[ 0.000000] efi: EFI v2.60 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0x77f98000 ACPI=0x77f98000 SMBIOS=0x796c2000 SMBIOS 3.0=0x796c1000 MPS=0xfca60 ESRT=0x74a12f18 MEMATTR=0x74a35018
[ 0.000000] secureboot: Secure boot disabled
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: System manufacturer System Product Name/ROG ZENITH EXTREME, BIOS 1402 08/03/2018
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x87f300 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 00007C000000 mask FFFFFC000000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000880000000 aka 34816M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0x7c000000-0xffffffff] usable ==> reserved
[ 0.000000] last_pfn = 0x7c000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcf60-0x000fcf6f] mapped at [(____ptrval____)]
[ 0.000000] esrt: Reserving ESRT space from 0x0000000074a12f18 to 0x0000000074a12f50.
[ 0.000000] Base memory trampoline at [(____ptrval____)] 96000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x73daaf000, 0x73daaffff] PGTABLE
[ 0.000000] BRK [0x73dab0000, 0x73dab0fff] PGTABLE
[ 0.000000] BRK [0x73dab1000, 0x73dab1fff] PGTABLE
[ 0.000000] BRK [0x73dab2000, 0x73dab2fff] PGTABLE
[ 0.000000] BRK [0x73dab3000, 0x73dab3fff] PGTABLE
[ 0.000000] BRK [0x73dab4000, 0x73dab4fff] PGTABLE
[ 0.000000] BRK [0x73dab5000, 0x73dab5fff] PGTABLE
[ 0.000000] BRK [0x73dab6000, 0x73dab6fff] PGTABLE
[ 0.000000] BRK [0x73dab7000, 0x73dab7fff] PGTABLE
[ 0.000000] BRK [0x73dab8000, 0x73dab8fff] PGTABLE
[ 0.000000] BRK [0x73dab9000, 0x73dab9fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x4bda6000-0x4d529fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x0000000077F98000 000024 (v02 AMD )
[ 0.000000] ACPI: XSDT 0x0000000077F980A0 0000B4 (v01 AMD A M I 03242016 AMI 00010013)
[ 0.000000] ACPI: FACP 0x0000000077FA56B8 000114 (v06 AMD A M I 03242016 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x0000000077F981E8 00D4CB (v02 AMD A M I 03242016 INTL 20120913)
[ 0.000000] ACPI: FACS 0x000000007847D700 000040
[ 0.000000] ACPI: APIC 0x0000000077FA57D0 00046A (v03 AMD A M I 03242016 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x0000000077FA5C40 000044 (v01 AMD A M I 03242016 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x0000000077FA5C88 00009C (v01 AMD A M I 03242016 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x0000000077FB9830 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x0000000077FA5D80 008C4C (v02 AMD AMD ALIB 00000002 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x0000000077FAE9D0 0001CC (v02 AMD CPUSSDT 03242016 AMI 03242016)
[ 0.000000] ACPI: SSDT 0x0000000077FAEBA0 002C23 (v01 AMD AMD AOD 00000001 INTL 20120913)
[ 0.000000] ACPI: MCFG 0x0000000077FB17C8 00003C (v01 AMD A M I 03242016 MSFT 00010013)
[ 0.000000] ACPI: SSDT 0x0000000077FB1808 004604 (v01 AMD AMD CPU 00000001 AMD 00000001)
[ 0.000000] ACPI: CRAT 0x0000000077FB5E10 001DF8 (v01 AMD AMD CRAT 00000001 AMD 00000001)
[ 0.000000] ACPI: CDIT 0x0000000077FB7C08 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
[ 0.000000] ACPI: HPET 0x0000000077FB7C38 000038 (v01 AMD A M I 03242016 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x0000000077FB7C70 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x0000000077FB7C98 000042 (v01 AMD A M I 00000002 01000013)
[ 0.000000] ACPI: BGRT 0x0000000077FB7CE0 000038 (v01 AMD A M I 03242016 AMI 00010013)
[ 0.000000] ACPI: IVRS 0x0000000077FB7D18 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
[ 0.000000] ACPI: SSDT 0x0000000077FB7DE8 001A41 (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] system APIC only can use physical flat
[ 0.000000] Setting APIC routing to physical flat.
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000087f2fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x87f2d5000-0x87f2fffff]
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: Using PIT calibration value
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000087f2fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000009deffff]
[ 0.000000] node 0: [mem 0x000000000a000000-0x000000000affffff]
[ 0.000000] node 0: [mem 0x000000000b020000-0x0000000076a48fff]
[ 0.000000] node 0: [mem 0x000000007980a000-0x000000007bffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000087f2fffff]
[ 0.000000] Reserved but unavailable: 32082 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f2fffff]
[ 0.000000] On node 0 totalpages: 8356526
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 26 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7681 pages used for memmap
[ 0.000000] DMA32 zone: 491535 pages, LIFO batch:31
[ 0.000000] Normal zone: 122828 pages used for memmap
[ 0.000000] Normal zone: 7860992 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] system APIC only can use physical flat
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 128, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 129, version 33, address 0xefc00000, GSI 24-55
[ 0.000000] IOAPIC[2]: apic_id 130, version 33, address 0xb7a00000, GSI 56-87
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 128 CPUs, 96 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x09df0000-0x09ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x4bd74000-0x4bd74fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x4bd93000-0x4bd93fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x4bd94000-0x4bd94fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x4bda5000-0x4bda5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x76a49000-0x77f8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x77f90000-0x77fb9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x77fba000-0x7847ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78480000-0x79809fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7c000000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xb79fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb7a00000-0xb7a00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb7a01000-0xb7afffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb7b00000-0xb7b7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb7b80000-0xef7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xef800000-0xef8fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xef900000-0xefbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xefc00000-0xefc00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xefc01000-0xefcfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xefd00000-0xefd7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xefd80000-0xfe9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedbffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedc0000-0xfedc0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedc1000-0xfedc1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] [mem 0xb7b80000-0xef7fffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x93/0x558 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:128 nr_cpu_ids:128 nr_node_ids:1
[ 0.000000] percpu: Embedded 45 pages/cpu @(____ptrval____) s147456 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 000 001 002 003 004 005 006 007
[ 0.000000] pcpu-alloc: [0] 008 009 010 011 012 013 014 015
[ 0.000000] pcpu-alloc: [0] 016 017 018 019 020 021 022 023
[ 0.000000] pcpu-alloc: [0] 024 025 026 027 028 029 030 031
[ 0.000000] pcpu-alloc: [0] 032 033 034 035 036 037 038 039
[ 0.000000] pcpu-alloc: [0] 040 041 042 043 044 045 046 047
[ 0.000000] pcpu-alloc: [0] 048 049 050 051 052 053 054 055
[ 0.000000] pcpu-alloc: [0] 056 057 058 059 060 061 062 063
[ 0.000000] pcpu-alloc: [0] 064 065 066 067 068 069 070 071
[ 0.000000] pcpu-alloc: [0] 072 073 074 075 076 077 078 079
[ 0.000000] pcpu-alloc: [0] 080 081 082 083 084 085 086 087
[ 0.000000] pcpu-alloc: [0] 088 089 090 091 092 093 094 095
[ 0.000000] pcpu-alloc: [0] 096 097 098 099 100 101 102 103
[ 0.000000] pcpu-alloc: [0] 104 105 106 107 108 109 110 111
[ 0.000000] pcpu-alloc: [0] 112 113 114 115 116 117 118 119
[ 0.000000] pcpu-alloc: [0] 120 121 122 123 124 125 126 127
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8225927
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.18.16-300.fc29.x86_64 root=/dev/mapper/fedora-root ro resume=/dev/mapper/fedora-swap rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=en_US.UTF-8
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 520192 bytes
[ 0.000000] log_buf_len min size: 262144 bytes
[ 0.000000] log_buf_len: 1048576 bytes
[ 0.000000] early log buf free: 242092(92%)
[ 0.000000] Memory: 32533372K/33426104K available (12300K kernel code, 1624K rwdata, 4056K rodata, 2160K init, 1336K bss, 892732K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=128, Nodes=1
[ 0.000000] ftrace: allocating 37988 entries in 149 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=128.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=128
[ 0.000000] NR_IRQS: 65792, nr_irqs: 2536, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180531
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] [Firmware Bug]: AMD-Vi: IOAPIC[130] not in IVRS table
[ 0.000000] AMD-Vi: Disabling interrupt remapping
[ 0.002000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.007000] tsc: Fast TSC calibration failed
[ 0.009000] tsc: PIT calibration matches HPET. 1 loops
[ 0.009000] tsc: Detected 3393.209 MHz processor
[ 0.009000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30e93f810fe, max_idle_ns: 440795312223 ns
[ 0.009000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6786.41 BogoMIPS (lpj=3393209)
[ 0.009000] pid_max: default: 131072 minimum: 1024
[ 0.010123] Security Framework initialized
[ 0.010124] Yama: becoming mindful.
[ 0.010127] SELinux: Initializing.
[ 0.010194] SELinux: Starting in permissive mode
[ 0.014988] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.017510] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.017628] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.017693] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.018128] mce: CPU supports 23 MCE banks
[ 0.018148] LVT offset 1 assigned for vector 0xf9
[ 0.018215] LVT offset 2 assigned for vector 0xf4
[ 0.018226] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.018226] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[ 0.018228] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.018228] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.018229] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.018229] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.023044] Freeing SMP alternatives memory: 36K
[ 0.028000] smpboot: CPU0: AMD Ryzen Threadripper 1950X 16-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
[ 0.028000] Performance Events: Fam17h core perfctr, AMD PMU driver.
[ 0.028000] ... version: 0
[ 0.028000] ... bit width: 48
[ 0.028000] ... generic registers: 6
[ 0.028000] ... value mask: 0000ffffffffffff
[ 0.028000] ... max period: 00007fffffffffff
[ 0.028000] ... fixed-purpose events: 0
[ 0.028000] ... event mask: 000000000000003f
[ 0.028000] Hierarchical SRCU implementation.
[ 0.028000] random: crng done (trusting CPU's manufacturer)
[ 0.028585] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.028597] smp: Bringing up secondary CPUs ...
[ 0.028677] x86: Booting SMP configuration:
[ 0.028678] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27 #28 #29 #30 #31
[ 0.070004] smp: Brought up 1 node, 32 CPUs
[ 0.070005] smpboot: Max logical packages: 4
[ 0.070007] smpboot: Total of 32 processors activated (217165.37 BogoMIPS)
[ 0.073593] devtmpfs: initialized
[ 0.073593] x86/mm: Memory block size: 128MB
[ 0.075280] PM: Registering ACPI NVS region [mem 0x77fba000-0x7847ffff] (5005312 bytes)
[ 0.075280] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.075280] futex hash table entries: 32768 (order: 9, 2097152 bytes)
[ 0.076308] pinctrl core: initialized pinctrl subsystem
[ 0.076428] RTC time: 11:25:40, date: 11/06/18
[ 0.076663] NET: Registered protocol family 16
[ 0.076733] audit: initializing netlink subsys (disabled)
[ 0.076739] audit: type=2000 audit(1541503539.076:1): state=initialized audit_enabled=0 res=1
[ 0.076739] cpuidle: using governor menu
[ 0.077065] ACPI: bus type PCI registered
[ 0.077067] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.077203] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.077206] PCI: not using MMCONFIG
[ 0.077207] PCI: Using configuration type 1 for base access
[ 0.077207] PCI: Using configuration type 1 for extended access
[ 0.079298] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.079298] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.079298] cryptd: max_cpu_qlen set to 1000
[ 0.080271] ACPI: Added _OSI(Module Device)
[ 0.080272] ACPI: Added _OSI(Processor Device)
[ 0.080272] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.080273] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.080273] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.089246] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.093569] ACPI: EC: EC started
[ 0.093570] ACPI: EC: interrupt blocked
[ 0.093580] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
[ 0.093581] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x2, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.093582] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
[ 0.093583] ACPI: Interpreter enabled
[ 0.093595] ACPI: (supports S0 S3 S4 S5)
[ 0.093596] ACPI: Using IOAPIC for interrupt routing
[ 0.093846] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.093874] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources
[ 0.093887] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.094206] ACPI: Enabled 4 GPEs in block 00 to 1F
[ 0.099704] ACPI: Power Resource [P0SA] (off)
[ 0.099719] ACPI: Power Resource [P3SA] (off)
[ 0.100937] ACPI: Power Resource [P0SA] (off)
[ 0.100952] ACPI: Power Resource [P3SA] (off)
[ 0.105280] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.105284] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.105388] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[ 0.105486] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.105574] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x2fff]; [io 0x0000-0x2fff window] ignored
[ 0.105672] PCI host bridge to bus 0000:00
[ 0.105673] pci_bus 0000:00: root bus resource [io 0x0000-0x2fff]
[ 0.105675] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.105675] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.105676] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.105677] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.105678] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.105679] pci_bus 0000:00: root bus resource [mem 0xb8000000-0xd9ffffff window]
[ 0.105680] pci_bus 0000:00: root bus resource [mem 0x880000000-0x82bfffffff window]
[ 0.105681] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.105687] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
[ 0.105753] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
[ 0.105830] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[ 0.105881] pci 0000:00:01.1: [1022:1453] type 01 class 0x060400
[ 0.105991] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.106061] pci 0000:00:01.2: [1022:1453] type 01 class 0x060400
[ 0.106161] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[ 0.106242] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
[ 0.106307] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
[ 0.106357] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
[ 0.106917] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.107005] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
[ 0.107074] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
[ 0.107122] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
[ 0.107148] pci 0000:00:07.1: enabling Extended Tags
[ 0.107225] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[ 0.107309] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[ 0.107360] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
[ 0.107846] pci 0000:00:08.1: enabling Extended Tags
[ 0.107919] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.108029] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.108228] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.108432] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
[ 0.108472] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
[ 0.108514] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
[ 0.108555] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
[ 0.108597] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
[ 0.108637] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
[ 0.108679] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
[ 0.108718] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
[ 0.108761] pci 0000:00:19.0: [1022:1460] type 00 class 0x060000
[ 0.108805] pci 0000:00:19.1: [1022:1461] type 00 class 0x060000
[ 0.108850] pci 0000:00:19.2: [1022:1462] type 00 class 0x060000
[ 0.108893] pci 0000:00:19.3: [1022:1463] type 00 class 0x060000
[ 0.108938] pci 0000:00:19.4: [1022:1464] type 00 class 0x060000
[ 0.108981] pci 0000:00:19.5: [1022:1465] type 00 class 0x060000
[ 0.109031] pci 0000:00:19.6: [1022:1466] type 00 class 0x060000
[ 0.109076] pci 0000:00:19.7: [1022:1467] type 00 class 0x060000
[ 0.109212] pci 0000:01:00.0: [1022:43ba] type 00 class 0x0c0330
[ 0.109233] pci 0000:01:00.0: reg 0x10: [mem 0xd98a0000-0xd98a7fff 64bit]
[ 0.109300] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.109361] pci 0000:01:00.1: [1022:43b6] type 00 class 0x010601
[ 0.109403] pci 0000:01:00.1: reg 0x24: [mem 0xd9880000-0xd989ffff]
[ 0.109409] pci 0000:01:00.1: reg 0x30: [mem 0xd9800000-0xd987ffff pref]
[ 0.109443] pci 0000:01:00.1: PME# supported from D3hot D3cold
[ 0.109490] pci 0000:01:00.2: [1022:43b1] type 01 class 0x060400
[ 0.109556] pci 0000:01:00.2: PME# supported from D3hot D3cold
[ 0.109631] pci 0000:00:01.1: PCI bridge to [bus 01-08]
[ 0.109634] pci 0000:00:01.1: bridge window [io 0x2000-0x2fff]
[ 0.109636] pci 0000:00:01.1: bridge window [mem 0xd9200000-0xd98fffff]
[ 0.109705] pci 0000:02:00.0: [1022:43b4] type 01 class 0x060400
[ 0.109782] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.109843] pci 0000:02:01.0: [1022:43b4] type 01 class 0x060400
[ 0.109920] pci 0000:02:01.0: PME# supported from D3hot D3cold
[ 0.109981] pci 0000:02:02.0: [1022:43b4] type 01 class 0x060400
[ 0.110059] pci 0000:02:02.0: PME# supported from D3hot D3cold
[ 0.110119] pci 0000:02:03.0: [1022:43b4] type 01 class 0x060400
[ 0.110196] pci 0000:02:03.0: PME# supported from D3hot D3cold
[ 0.110259] pci 0000:02:04.0: [1022:43b4] type 01 class 0x060400
[ 0.110336] pci 0000:02:04.0: PME# supported from D3hot D3cold
[ 0.110403] pci 0000:02:09.0: [1022:43b4] type 01 class 0x060400
[ 0.110479] pci 0000:02:09.0: PME# supported from D3hot D3cold
[ 0.110553] pci 0000:01:00.2: PCI bridge to [bus 02-08]
[ 0.110557] pci 0000:01:00.2: bridge window [io 0x2000-0x2fff]
[ 0.110559] pci 0000:01:00.2: bridge window [mem 0xd9200000-0xd97fffff]
[ 0.110615] pci 0000:03:00.0: [168c:003e] type 00 class 0x028000
[ 0.110659] pci 0000:03:00.0: reg 0x10: [mem 0xd9400000-0xd95fffff 64bit]
[ 0.110804] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.110956] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.110962] pci 0000:02:00.0: bridge window [mem 0xd9400000-0xd95fffff]
[ 0.111014] pci 0000:04:00.0: [1ae9:0310] type 00 class 0x028000
[ 0.111046] pci 0000:04:00.0: reg 0x10: [mem 0xd9200000-0xd93fffff 64bit]
[ 0.114024] pci 0000:02:01.0: PCI bridge to [bus 04]
[ 0.114030] pci 0000:02:01.0: bridge window [mem 0xd9200000-0xd93fffff]
[ 0.114093] pci 0000:05:00.0: [8086:1539] type 00 class 0x020000
[ 0.114136] pci 0000:05:00.0: reg 0x10: [mem 0xd9700000-0xd971ffff]
[ 0.114167] pci 0000:05:00.0: reg 0x18: [io 0x2000-0x201f]
[ 0.114183] pci 0000:05:00.0: reg 0x1c: [mem 0xd9720000-0xd9723fff]
[ 0.114340] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.114462] pci 0000:02:02.0: PCI bridge to [bus 05]
[ 0.114466] pci 0000:02:02.0: bridge window [io 0x2000-0x2fff]
[ 0.114468] pci 0000:02:02.0: bridge window [mem 0xd9700000-0xd97fffff]
[ 0.114504] pci 0000:02:03.0: PCI bridge to [bus 06]
[ 0.114544] pci 0000:02:04.0: PCI bridge to [bus 07]
[ 0.114863] pci 0000:08:00.0: [1b21:2142] type 00 class 0x0c0330
[ 0.114899] pci 0000:08:00.0: reg 0x10: [mem 0xd9600000-0xd9607fff 64bit]
[ 0.115076] pci 0000:08:00.0: PME# supported from D0
[ 0.115190] pci 0000:02:09.0: PCI bridge to [bus 08]
[ 0.115196] pci 0000:02:09.0: bridge window [mem 0xd9600000-0xd96fffff]
[ 0.115285] pci 0000:09:00.0: [144d:a804] type 00 class 0x010802
[ 0.115304] pci 0000:09:00.0: reg 0x10: [mem 0xd9e00000-0xd9e03fff 64bit]
[ 0.115439] pci 0000:00:01.2: PCI bridge to [bus 09]
[ 0.115442] pci 0000:00:01.2: bridge window [mem 0xd9e00000-0xd9efffff]
[ 0.115900] pci 0000:0a:00.0: [10de:1b06] type 00 class 0x030000
[ 0.115921] pci 0000:0a:00.0: reg 0x10: [mem 0xd8000000-0xd8ffffff]
[ 0.115932] pci 0000:0a:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.115942] pci 0000:0a:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.115949] pci 0000:0a:00.0: reg 0x24: [io 0x1000-0x107f]
[ 0.115956] pci 0000:0a:00.0: reg 0x30: [mem 0xd9000000-0xd907ffff pref]
[ 0.115966] pci 0000:0a:00.0: BAR 3: assigned to efifb
[ 0.116076] pci 0000:0a:00.1: [10de:10ef] type 00 class 0x040300
[ 0.116092] pci 0000:0a:00.1: reg 0x10: [mem 0xd9080000-0xd9083fff]
[ 0.116234] pci 0000:00:03.1: PCI bridge to [bus 0a]
[ 0.116236] pci 0000:00:03.1: bridge window [io 0x1000-0x1fff]
[ 0.116238] pci 0000:00:03.1: bridge window [mem 0xd8000000-0xd90fffff]
[ 0.116241] pci 0000:00:03.1: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.116879] pci 0000:0b:00.0: [1022:145a] type 00 class 0x130000
[ 0.116902] pci 0000:0b:00.0: enabling Extended Tags
[ 0.116956] pci 0000:0b:00.2: [1022:1456] type 00 class 0x108000
[ 0.116969] pci 0000:0b:00.2: reg 0x18: [mem 0xd9b00000-0xd9bfffff]
[ 0.116976] pci 0000:0b:00.2: reg 0x24: [mem 0xd9c00000-0xd9c01fff]
[ 0.116981] pci 0000:0b:00.2: enabling Extended Tags
[ 0.117041] pci 0000:0b:00.3: [1022:145c] type 00 class 0x0c0330
[ 0.117052] pci 0000:0b:00.3: reg 0x10: [mem 0xd9a00000-0xd9afffff 64bit]
[ 0.117069] pci 0000:0b:00.3: enabling Extended Tags
[ 0.117091] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold
[ 0.117139] pci 0000:00:07.1: PCI bridge to [bus 0b]
[ 0.117142] pci 0000:00:07.1: bridge window [mem 0xd9a00000-0xd9cfffff]
[ 0.117218] pci 0000:0c:00.0: [1022:1455] type 00 class 0x130000
[ 0.117242] pci 0000:0c:00.0: enabling Extended Tags
[ 0.117302] pci 0000:0c:00.2: [1022:7901] type 00 class 0x010601
[ 0.117322] pci 0000:0c:00.2: reg 0x24: [mem 0xd9d08000-0xd9d08fff]
[ 0.117327] pci 0000:0c:00.2: enabling Extended Tags
[ 0.117352] pci 0000:0c:00.2: PME# supported from D3hot D3cold
[ 0.117394] pci 0000:0c:00.3: [1022:1457] type 00 class 0x040300
[ 0.117403] pci 0000:0c:00.3: reg 0x10: [mem 0xd9d00000-0xd9d07fff]
[ 0.117419] pci 0000:0c:00.3: enabling Extended Tags
[ 0.117442] pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold
[ 0.117500] pci 0000:00:08.1: PCI bridge to [bus 0c]
[ 0.117503] pci 0000:00:08.1: bridge window [mem 0xd9d00000-0xd9dfffff]
[ 0.117522] pci_bus 0000:00: on NUMA node 0
[ 0.117783] ACPI: PCI Root Bridge [S0D1] (domain 0000 [bus 40-ff])
[ 0.117785] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.117887] acpi PNP0A08:01: _OSC: platform does not support [SHPCHotplug LTR]
[ 0.117984] acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.117992] acpi PNP0A08:01: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[ 0.118143] PCI host bridge to bus 0000:40
[ 0.118144] pci_bus 0000:40: root bus resource [io 0x3000-0xffff window]
[ 0.118145] pci_bus 0000:40: root bus resource [mem 0x80000000-0x823fffff window]
[ 0.118146] pci_bus 0000:40: root bus resource [mem 0x82c0000000-0xfcffffffff window]
[ 0.118147] pci_bus 0000:40: root bus resource [bus 40-ff]
[ 0.118151] pci 0000:40:00.0: [1022:1450] type 00 class 0x060000
[ 0.118207] pci 0000:40:00.2: [1022:1451] type 00 class 0x080600
[ 0.118289] pci 0000:40:01.0: [1022:1452] type 00 class 0x060000
[ 0.118354] pci 0000:40:02.0: [1022:1452] type 00 class 0x060000
[ 0.118421] pci 0000:40:03.0: [1022:1452] type 00 class 0x060000
[ 0.118484] pci 0000:40:04.0: [1022:1452] type 00 class 0x060000
[ 0.118555] pci 0000:40:07.0: [1022:1452] type 00 class 0x060000
[ 0.118608] pci 0000:40:07.1: [1022:1454] type 01 class 0x060400
[ 0.118644] pci 0000:40:07.1: enabling Extended Tags
[ 0.118720] pci 0000:40:07.1: PME# supported from D0 D3hot D3cold
[ 0.119068] pci 0000:40:08.0: [1022:1452] type 00 class 0x060000
[ 0.119120] pci 0000:40:08.1: [1022:1454] type 01 class 0x060400
[ 0.119151] pci 0000:40:08.1: enabling Extended Tags
[ 0.119227] pci 0000:40:08.1: PME# supported from D0 D3hot D3cold
[ 0.119421] pci 0000:41:00.0: [1022:145a] type 00 class 0x130000
[ 0.119447] pci 0000:41:00.0: enabling Extended Tags
[ 0.119508] pci 0000:41:00.2: [1022:1456] type 00 class 0x108000
[ 0.119523] pci 0000:41:00.2: reg 0x18: [mem 0x82100000-0x821fffff]
[ 0.119531] pci 0000:41:00.2: reg 0x24: [mem 0x82200000-0x82201fff]
[ 0.119536] pci 0000:41:00.2: enabling Extended Tags
[ 0.119602] pci 0000:41:00.3: [1022:145c] type 00 class 0x0c0330
[ 0.119615] pci 0000:41:00.3: reg 0x10: [mem 0x82000000-0x820fffff 64bit]
[ 0.119635] pci 0000:41:00.3: enabling Extended Tags
[ 0.119660] pci 0000:41:00.3: PME# supported from D0 D3hot D3cold
[ 0.119714] pci 0000:40:07.1: PCI bridge to [bus 41]
[ 0.119718] pci 0000:40:07.1: bridge window [mem 0x82000000-0x822fffff]
[ 0.120056] pci 0000:42:00.0: [1022:1455] type 00 class 0x130000
[ 0.120084] pci 0000:42:00.0: enabling Extended Tags
[ 0.120152] pci 0000:42:00.2: [1022:7901] type 00 class 0x010601
[ 0.120174] pci 0000:42:00.2: reg 0x24: [mem 0x82300000-0x82300fff]
[ 0.120181] pci 0000:42:00.2: enabling Extended Tags
[ 0.120209] pci 0000:42:00.2: PME# supported from D3hot D3cold
[ 0.120266] pci 0000:40:08.1: PCI bridge to [bus 42]
[ 0.120270] pci 0000:40:08.1: bridge window [mem 0x82300000-0x823fffff]
[ 0.120280] pci_bus 0000:40: on NUMA node 1
[ 0.120358] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.120398] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.120431] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.120474] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.120512] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.120543] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.120574] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.120605] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.121278] ACPI: EC: interrupt unblocked
[ 0.121292] ACPI: EC: event unblocked
[ 0.121300] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x2, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.121302] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.121351] pci 0000:0a:00.0: vgaarb: setting as boot VGA device
[ 0.121351] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.121351] pci 0000:0a:00.0: vgaarb: bridge control possible
[ 0.121351] vgaarb: loaded
[ 0.121351] SCSI subsystem initialized
[ 0.121351] libata version 3.00 loaded.
[ 0.121351] ACPI: bus type USB registered
[ 0.121351] usbcore: registered new interface driver usbfs
[ 0.121351] usbcore: registered new interface driver hub
[ 0.121351] usbcore: registered new device driver usb
[ 0.123759] pps_core: LinuxPPS API ver. 1 registered
[ 0.123759] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.123761] PTP clock support registered
[ 0.123866] EDAC MC: Ver: 3.0.0
[ 0.124097] Registered efivars operations
[ 0.153011] PCI: Using ACPI for IRQ routing
[ 0.161708] PCI: pci_cache_line_size set to 64 bytes
[ 0.161801] e820: reserve RAM buffer [mem 0x09df0000-0x0bffffff]
[ 0.161802] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[ 0.161803] e820: reserve RAM buffer [mem 0x4bd74018-0x4bffffff]
[ 0.161803] e820: reserve RAM buffer [mem 0x4bd94018-0x4bffffff]
[ 0.161804] e820: reserve RAM buffer [mem 0x76a49000-0x77ffffff]
[ 0.161804] e820: reserve RAM buffer [mem 0x87f300000-0x87fffffff]
[ 0.161894] NetLabel: Initializing
[ 0.161895] NetLabel: domain hash size = 128
[ 0.161895] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.161905] NetLabel: unlabeled traffic allowed by default
[ 0.161907] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.161907] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.164071] clocksource: Switched to clocksource tsc-early
[ 0.175097] VFS: Disk quotas dquot_6.6.0
[ 0.175160] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.175271] pnp: PnP ACPI init
[ 0.175418] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.175422] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.175506] system 00:01: [mem 0xefd00000-0xefd7ffff] could not be reserved
[ 0.175508] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.175558] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.175674] system 00:03: [io 0x02a0-0x02af] has been reserved
[ 0.175676] system 00:03: [io 0x0230-0x023f] has been reserved
[ 0.175677] system 00:03: [io 0x0290-0x029f] has been reserved
[ 0.175679] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.175873] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.175874] system 00:04: [io 0x040b] has been reserved
[ 0.175875] system 00:04: [io 0x04d6] has been reserved
[ 0.175876] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.175877] system 00:04: [io 0x0c14] has been reserved
[ 0.175878] system 00:04: [io 0x0c50-0x0c51] has been reserved
[ 0.175879] system 00:04: [io 0x0c52] has been reserved
[ 0.175879] system 00:04: [io 0x0c6c] has been reserved
[ 0.175880] system 00:04: [io 0x0c6f] has been reserved
[ 0.175881] system 00:04: [io 0x0cd0-0x0cd1] has been reserved
[ 0.175882] system 00:04: [io 0x0cd2-0x0cd3] has been reserved
[ 0.175883] system 00:04: [io 0x0cd4-0x0cd5] has been reserved
[ 0.175884] system 00:04: [io 0x0cd6-0x0cd7] has been reserved
[ 0.175885] system 00:04: [io 0x0cd8-0x0cdf] has been reserved
[ 0.175886] system 00:04: [io 0x0800-0x089f] has been reserved
[ 0.175887] system 00:04: [io 0x0b00-0x0b0f] has been reserved
[ 0.175887] system 00:04: [io 0x0b20-0x0b3f] has been reserved
[ 0.175888] system 00:04: [io 0x0900-0x090f] has been reserved
[ 0.175889] system 00:04: [io 0x0910-0x091f] has been reserved
[ 0.175891] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.175892] system 00:04: [mem 0xfec01000-0xfec01fff] has been reserved
[ 0.175893] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.175894] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.175895] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.175896] system 00:04: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.175897] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.175898] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[ 0.175900] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.176010] system 00:05: [mem 0xb7b00000-0xb7b7ffff] has been reserved
[ 0.176013] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.176355] pnp: PnP ACPI: found 6 devices
[ 0.182131] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.182223] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.182228] pci 0000:02:00.0: bridge window [mem 0xd9400000-0xd95fffff]
[ 0.182235] pci 0000:02:01.0: PCI bridge to [bus 04]
[ 0.182238] pci 0000:02:01.0: bridge window [mem 0xd9200000-0xd93fffff]
[ 0.182244] pci 0000:02:02.0: PCI bridge to [bus 05]
[ 0.182246] pci 0000:02:02.0: bridge window [io 0x2000-0x2fff]
[ 0.182249] pci 0000:02:02.0: bridge window [mem 0xd9700000-0xd97fffff]
[ 0.182255] pci 0000:02:03.0: PCI bridge to [bus 06]
[ 0.182264] pci 0000:02:04.0: PCI bridge to [bus 07]
[ 0.182273] pci 0000:02:09.0: PCI bridge to [bus 08]
[ 0.182276] pci 0000:02:09.0: bridge window [mem 0xd9600000-0xd96fffff]
[ 0.182282] pci 0000:01:00.2: PCI bridge to [bus 02-08]
[ 0.182284] pci 0000:01:00.2: bridge window [io 0x2000-0x2fff]
[ 0.182287] pci 0000:01:00.2: bridge window [mem 0xd9200000-0xd97fffff]
[ 0.182292] pci 0000:00:01.1: PCI bridge to [bus 01-08]
[ 0.182293] pci 0000:00:01.1: bridge window [io 0x2000-0x2fff]
[ 0.182295] pci 0000:00:01.1: bridge window [mem 0xd9200000-0xd98fffff]
[ 0.182299] pci 0000:00:01.2: PCI bridge to [bus 09]
[ 0.182301] pci 0000:00:01.2: bridge window [mem 0xd9e00000-0xd9efffff]
[ 0.182304] pci 0000:00:03.1: PCI bridge to [bus 0a]
[ 0.182305] pci 0000:00:03.1: bridge window [io 0x1000-0x1fff]
[ 0.182308] pci 0000:00:03.1: bridge window [mem 0xd8000000-0xd90fffff]
[ 0.182309] pci 0000:00:03.1: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.182313] pci 0000:00:07.1: PCI bridge to [bus 0b]
[ 0.182315] pci 0000:00:07.1: bridge window [mem 0xd9a00000-0xd9cfffff]
[ 0.182318] pci 0000:00:08.1: PCI bridge to [bus 0c]
[ 0.182320] pci 0000:00:08.1: bridge window [mem 0xd9d00000-0xd9dfffff]
[ 0.182325] pci_bus 0000:00: resource 4 [io 0x0000-0x2fff]
[ 0.182326] pci_bus 0000:00: resource 5 [io 0x0000-0x03af window]
[ 0.182327] pci_bus 0000:00: resource 6 [io 0x03e0-0x0cf7 window]
[ 0.182328] pci_bus 0000:00: resource 7 [io 0x03b0-0x03df window]
[ 0.182329] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.182330] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.182331] pci_bus 0000:00: resource 10 [mem 0xb8000000-0xd9ffffff window]
[ 0.182332] pci_bus 0000:00: resource 11 [mem 0x880000000-0x82bfffffff window]
[ 0.182333] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.182334] pci_bus 0000:01: resource 1 [mem 0xd9200000-0xd98fffff]
[ 0.182335] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.182335] pci_bus 0000:02: resource 1 [mem 0xd9200000-0xd97fffff]
[ 0.182336] pci_bus 0000:03: resource 1 [mem 0xd9400000-0xd95fffff]
[ 0.182337] pci_bus 0000:04: resource 1 [mem 0xd9200000-0xd93fffff]
[ 0.182338] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.182339] pci_bus 0000:05: resource 1 [mem 0xd9700000-0xd97fffff]
[ 0.182340] pci_bus 0000:08: resource 1 [mem 0xd9600000-0xd96fffff]
[ 0.182341] pci_bus 0000:09: resource 1 [mem 0xd9e00000-0xd9efffff]
[ 0.182342] pci_bus 0000:0a: resource 0 [io 0x1000-0x1fff]
[ 0.182343] pci_bus 0000:0a: resource 1 [mem 0xd8000000-0xd90fffff]
[ 0.182344] pci_bus 0000:0a: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.182345] pci_bus 0000:0b: resource 1 [mem 0xd9a00000-0xd9cfffff]
[ 0.182346] pci_bus 0000:0c: resource 1 [mem 0xd9d00000-0xd9dfffff]
[ 0.182381] pci 0000:40:07.1: PCI bridge to [bus 41]
[ 0.182384] pci 0000:40:07.1: bridge window [mem 0x82000000-0x822fffff]
[ 0.182388] pci 0000:40:08.1: PCI bridge to [bus 42]
[ 0.182390] pci 0000:40:08.1: bridge window [mem 0x82300000-0x823fffff]
[ 0.182394] pci_bus 0000:40: resource 4 [io 0x3000-0xffff window]
[ 0.182395] pci_bus 0000:40: resource 5 [mem 0x80000000-0x823fffff window]
[ 0.182396] pci_bus 0000:40: resource 6 [mem 0x82c0000000-0xfcffffffff window]
[ 0.182397] pci_bus 0000:41: resource 1 [mem 0x82000000-0x822fffff]
[ 0.182398] pci_bus 0000:42: resource 1 [mem 0x82300000-0x823fffff]
[ 0.182489] NET: Registered protocol family 2
[ 0.182820] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.182901] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.183234] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.183355] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.183510] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.183583] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.183964] NET: Registered protocol family 1
[ 0.184229] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.184235] pci 0000:0a:00.1: Linked as a consumer to 0000:0a:00.0
[ 0.184479] PCI: CLS 64 bytes, default 64
[ 0.184516] Unpacking initramfs...
[ 0.441400] Freeing initrd memory: 24080K
[ 0.503502] AMD-Vi: IOMMU performance counters supported
[ 0.505002] iommu: Adding device 0000:00:01.0 to group 0
[ 0.505719] iommu: Adding device 0000:00:01.1 to group 1
[ 0.506578] iommu: Adding device 0000:00:01.2 to group 2
[ 0.507271] iommu: Adding device 0000:00:02.0 to group 3
[ 0.508112] iommu: Adding device 0000:00:03.0 to group 4
[ 0.508903] iommu: Adding device 0000:00:03.1 to group 5
[ 0.509594] iommu: Adding device 0000:00:04.0 to group 6
[ 0.510442] iommu: Adding device 0000:00:07.0 to group 7
[ 0.511152] iommu: Adding device 0000:00:07.1 to group 8
[ 0.511952] iommu: Adding device 0000:00:08.0 to group 9
[ 0.512696] iommu: Adding device 0000:00:08.1 to group 10
[ 0.513478] iommu: Adding device 0000:00:14.0 to group 11
[ 0.513494] iommu: Adding device 0000:00:14.3 to group 11
[ 0.514258] iommu: Adding device 0000:00:18.0 to group 12
[ 0.514273] iommu: Adding device 0000:00:18.1 to group 12
[ 0.514287] iommu: Adding device 0000:00:18.2 to group 12
[ 0.514300] iommu: Adding device 0000:00:18.3 to group 12
[ 0.514315] iommu: Adding device 0000:00:18.4 to group 12
[ 0.514329] iommu: Adding device 0000:00:18.5 to group 12
[ 0.514343] iommu: Adding device 0000:00:18.6 to group 12
[ 0.514360] iommu: Adding device 0000:00:18.7 to group 12
[ 0.515230] iommu: Adding device 0000:00:19.0 to group 13
[ 0.515246] iommu: Adding device 0000:00:19.1 to group 13
[ 0.515261] iommu: Adding device 0000:00:19.2 to group 13
[ 0.515275] iommu: Adding device 0000:00:19.3 to group 13
[ 0.515290] iommu: Adding device 0000:00:19.4 to group 13
[ 0.515305] iommu: Adding device 0000:00:19.5 to group 13
[ 0.515320] iommu: Adding device 0000:00:19.6 to group 13
[ 0.515334] iommu: Adding device 0000:00:19.7 to group 13
[ 0.516050] iommu: Adding device 0000:01:00.0 to group 14
[ 0.516073] iommu: Adding device 0000:01:00.1 to group 14
[ 0.516094] iommu: Adding device 0000:01:00.2 to group 14
[ 0.516106] iommu: Adding device 0000:02:00.0 to group 14
[ 0.516118] iommu: Adding device 0000:02:01.0 to group 14
[ 0.516129] iommu: Adding device 0000:02:02.0 to group 14
[ 0.516142] iommu: Adding device 0000:02:03.0 to group 14
[ 0.516153] iommu: Adding device 0000:02:04.0 to group 14
[ 0.516164] iommu: Adding device 0000:02:09.0 to group 14
[ 0.516184] iommu: Adding device 0000:03:00.0 to group 14
[ 0.516200] iommu: Adding device 0000:04:00.0 to group 14
[ 0.516217] iommu: Adding device 0000:05:00.0 to group 14
[ 0.516232] iommu: Adding device 0000:08:00.0 to group 14
[ 0.517079] iommu: Adding device 0000:09:00.0 to group 15
[ 0.517786] iommu: Adding device 0000:0a:00.0 to group 16
[ 0.517813] iommu: Adding device 0000:0a:00.1 to group 16
[ 0.518557] iommu: Adding device 0000:0b:00.0 to group 17
[ 0.519211] iommu: Adding device 0000:0b:00.2 to group 18
[ 0.519965] iommu: Adding device 0000:0b:00.3 to group 19
[ 0.520626] iommu: Adding device 0000:0c:00.0 to group 20
[ 0.521369] iommu: Adding device 0000:0c:00.2 to group 21
[ 0.522034] iommu: Adding device 0000:0c:00.3 to group 22
[ 0.522268] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.522268] AMD-Vi: Extended features (0xf77ef22294ada):
[ 0.522269] PPR NX GT IA GA PC GA_vAPIC
[ 0.522410] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.523436] amd_uncore: AMD NB counters detected
[ 0.523459] amd_uncore: AMD LLC counters detected
[ 0.524078] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.527834] Initialise system trusted keyrings
[ 0.527847] Key type blacklist registered
[ 0.527895] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[ 0.528728] zbud: loaded
[ 0.529219] pstore: using deflate compression
[ 0.529286] SELinux: Registering netfilter hooks
[ 0.627180] alg: No test for 842 (842-generic)
[ 0.627202] alg: No test for 842 (842-scomp)
[ 0.631545] NET: Registered protocol family 38
[ 0.631548] Key type asymmetric registered
[ 0.631549] Asymmetric key parser 'x509' registered
[ 0.631584] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.631745] io scheduler noop registered
[ 0.631746] io scheduler deadline registered
[ 0.631775] io scheduler cfq registered (default)
[ 0.631775] io scheduler mq-deadline registered
[ 0.632066] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.636855] pcieport 0000:00:01.1: AER enabled with IRQ 29
[ 0.636890] pcieport 0000:00:01.2: AER enabled with IRQ 30
[ 0.636923] pcieport 0000:00:03.1: AER enabled with IRQ 31
[ 0.636954] pcieport 0000:00:07.1: AER enabled with IRQ 32
[ 0.636986] pcieport 0000:00:08.1: AER enabled with IRQ 34
[ 0.637251] pcieport 0000:40:07.1: AER enabled with IRQ 44
[ 0.637284] pcieport 0000:40:08.1: AER enabled with IRQ 46
[ 0.637292] pcieport 0000:00:01.1: Signaling PME with IRQ 29
[ 0.637304] pcieport 0000:00:01.2: Signaling PME with IRQ 30
[ 0.637314] pcieport 0000:00:03.1: Signaling PME with IRQ 31
[ 0.637326] pcieport 0000:00:07.1: Signaling PME with IRQ 32
[ 0.637337] pcieport 0000:00:08.1: Signaling PME with IRQ 34
[ 0.637348] pcieport 0000:40:07.1: Signaling PME with IRQ 44
[ 0.637361] pcieport 0000:40:08.1: Signaling PME with IRQ 46
[ 0.637375] dpc 0000:00:01.1:pcie008: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 6, DL_ActiveErr+
[ 0.637382] dpc 0000:00:01.2:pcie008: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 6, DL_ActiveErr+
[ 0.637389] dpc 0000:00:03.1:pcie008: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 6, DL_ActiveErr+
[ 0.637404] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.637420] efifb: probing for efifb
[ 0.637431] efifb: showing boot graphics
[ 0.638657] efifb: framebuffer at 0xd1000000, using 3600k, total 3600k
[ 0.638658] efifb: mode is 1280x720x32, linelength=5120, pages=1
[ 0.638658] efifb: scrolling: redraw
[ 0.638659] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.638695] fbcon: Deferring console take-over
[ 0.638696] fb0: EFI VGA frame buffer device
[ 0.638846] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.638851] ACPI: Power Button [PWRB]
[ 0.638877] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.638909] ACPI: Power Button [PWRF]
[ 0.638956] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.639017] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.639097] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.639239] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.639332] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.639434] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.639529] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.639632] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.639733] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.639801] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.639857] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.639943] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.640026] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.640115] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.640200] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.640285] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.640340] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.640387] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.640434] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.640479] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.640562] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.640655] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.640757] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.640846] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.640924] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.641017] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.641103] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.641158] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.641212] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.641298] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.641397] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.641479] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.641798] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.662714] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.663951] Non-volatile memory driver v1.3
[ 0.663973] Linux agpgart interface v0.103
[ 0.666770] ahci 0000:01:00.1: version 3.0
[ 0.666868] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
[ 0.666919] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 0.666921] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 0.667425] scsi host0: ahci
[ 0.667537] scsi host1: ahci
[ 0.667597] scsi host2: ahci
[ 0.667681] scsi host3: ahci
[ 0.667750] scsi host4: ahci
[ 0.667818] scsi host5: ahci
[ 0.667870] scsi host6: ahci
[ 0.667934] scsi host7: ahci
[ 0.667949] ata1: SATA max UDMA/133 abar m131072@0xd9880000 port 0xd9880100 irq 47
[ 0.667950] ata2: SATA max UDMA/133 abar m131072@0xd9880000 port 0xd9880180 irq 47
[ 0.667952] ata3: SATA max UDMA/133 abar m131072@0xd9880000 port 0xd9880200 irq 47
[ 0.667953] ata4: SATA max UDMA/133 abar m131072@0xd9880000 port 0xd9880280 irq 47
[ 0.667954] ata5: SATA max UDMA/133 abar m131072@0xd9880000 port 0xd9880300 irq 47
[ 0.667955] ata6: SATA max UDMA/133 abar m131072@0xd9880000 port 0xd9880380 irq 47
[ 0.667957] ata7: SATA max UDMA/133 abar m131072@0xd9880000 port 0xd9880400 irq 47
[ 0.667958] ata8: SATA max UDMA/133 abar m131072@0xd9880000 port 0xd9880480 irq 47
[ 0.667987] ahci 0000:0c:00.2: enabling device (0000 -> 0002)
[ 0.668087] ahci 0000:0c:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.668089] ahci 0000:0c:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 0.668209] scsi host8: ahci
[ 0.668227] ata9: SATA max UDMA/133 abar m4096@0xd9d08000 port 0xd9d08100 irq 49
[ 0.668250] ahci 0000:42:00.2: enabling device (0000 -> 0002)
[ 0.668350] ahci 0000:42:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.668352] ahci 0000:42:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 0.668483] scsi host9: ahci
[ 0.668501] ata10: SATA max UDMA/133 abar m4096@0x82300000 port 0x82300100 irq 51
[ 0.668549] libphy: Fixed MDIO Bus: probed
[ 0.668590] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.668591] ehci-pci: EHCI PCI platform driver
[ 0.668599] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.668601] ohci-pci: OHCI PCI platform driver
[ 0.668608] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.668667] QUIRK: Enable AMD PLL fix
[ 0.668673] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 0.668703] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 0.724051] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000008000418
[ 0.724219] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 0.724220] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.724222] usb usb1: Product: xHCI Host Controller
[ 0.724222] usb usb1: Manufacturer: Linux 4.18.16-300.fc29.x86_64 xhci-hcd
[ 0.724223] usb usb1: SerialNumber: 0000:01:00.0
[ 0.724297] hub 1-0:1.0: USB hub found
[ 0.724312] hub 1-0:1.0: 14 ports detected
[ 0.724533] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 0.724558] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 0.724560] xhci_hcd 0000:01:00.0: Host supports USB 3.10 Enhanced SuperSpeed
[ 0.724584] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.724595] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[ 0.724596] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.724597] usb usb2: Product: xHCI Host Controller
[ 0.724598] usb usb2: Manufacturer: Linux 4.18.16-300.fc29.x86_64 xhci-hcd
[ 0.724599] usb usb2: SerialNumber: 0000:01:00.0
[ 0.724659] hub 2-0:1.0: USB hub found
[ 0.724667] hub 2-0:1.0: 8 ports detected
[ 0.724861] xhci_hcd 0000:08:00.0: xHCI Host Controller
[ 0.724889] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3
[ 0.779724] xhci_hcd 0000:08:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000010
[ 0.780298] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 0.780299] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.780300] usb usb3: Product: xHCI Host Controller
[ 0.780300] usb usb3: Manufacturer: Linux 4.18.16-300.fc29.x86_64 xhci-hcd
[ 0.780301] usb usb3: SerialNumber: 0000:08:00.0
[ 0.780390] hub 3-0:1.0: USB hub found
[ 0.780396] hub 3-0:1.0: 2 ports detected
[ 0.780481] xhci_hcd 0000:08:00.0: xHCI Host Controller
[ 0.780505] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 4
[ 0.780507] xhci_hcd 0000:08:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.780549] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.780561] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[ 0.780562] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.780562] usb usb4: Product: xHCI Host Controller
[ 0.780563] usb usb4: Manufacturer: Linux 4.18.16-300.fc29.x86_64 xhci-hcd
[ 0.780564] usb usb4: SerialNumber: 0000:08:00.0
[ 0.780639] hub 4-0:1.0: USB hub found
[ 0.780645] hub 4-0:1.0: 2 ports detected
[ 0.780758] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[ 0.780797] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 5
[ 0.780887] xhci_hcd 0000:0b:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000418
[ 0.780995] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 0.780996] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.780996] usb usb5: Product: xHCI Host Controller
[ 0.780997] usb usb5: Manufacturer: Linux 4.18.16-300.fc29.x86_64 xhci-hcd
[ 0.780998] usb usb5: SerialNumber: 0000:0b:00.3
[ 0.781055] hub 5-0:1.0: USB hub found
[ 0.781060] hub 5-0:1.0: 4 ports detected
[ 0.781179] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[ 0.781203] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 6
[ 0.781205] xhci_hcd 0000:0b:00.3: Host supports USB 3.0 SuperSpeed
[ 0.781214] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.781240] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[ 0.781241] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.781242] usb usb6: Product: xHCI Host Controller
[ 0.781243] usb usb6: Manufacturer: Linux 4.18.16-300.fc29.x86_64 xhci-hcd
[ 0.781243] usb usb6: SerialNumber: 0000:0b:00.3
[ 0.781297] hub 6-0:1.0: USB hub found
[ 0.781302] hub 6-0:1.0: 4 ports detected
[ 0.781439] xhci_hcd 0000:41:00.3: xHCI Host Controller
[ 0.781467] xhci_hcd 0000:41:00.3: new USB bus registered, assigned bus number 7
[ 0.781561] xhci_hcd 0000:41:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000418
[ 0.781675] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 0.781676] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.781677] usb usb7: Product: xHCI Host Controller
[ 0.781678] usb usb7: Manufacturer: Linux 4.18.16-300.fc29.x86_64 xhci-hcd
[ 0.781679] usb usb7: SerialNumber: 0000:41:00.3
[ 0.781735] hub 7-0:1.0: USB hub found
[ 0.781741] hub 7-0:1.0: 4 ports detected
[ 0.781868] xhci_hcd 0000:41:00.3: xHCI Host Controller
[ 0.781904] xhci_hcd 0000:41:00.3: new USB bus registered, assigned bus number 8
[ 0.781906] xhci_hcd 0000:41:00.3: Host supports USB 3.0 SuperSpeed
[ 0.781914] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.781926] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[ 0.781927] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.781928] usb usb8: Product: xHCI Host Controller
[ 0.781929] usb usb8: Manufacturer: Linux 4.18.16-300.fc29.x86_64 xhci-hcd
[ 0.781929] usb usb8: SerialNumber: 0000:41:00.3
[ 0.781982] hub 8-0:1.0: USB hub found
[ 0.781987] hub 8-0:1.0: 4 ports detected
[ 0.782094] usbcore: registered new interface driver usbserial_generic
[ 0.782099] usbserial: USB Serial support registered for generic
[ 0.782112] i8042: PNP: No PS/2 controller found.
[ 0.782141] mousedev: PS/2 mouse device common for all mice
[ 0.782228] rtc_cmos 00:02: RTC can wake from S4
[ 0.782497] rtc_cmos 00:02: registered as rtc0
[ 0.782498] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.782550] device-mapper: uevent: version 1.0.3
[ 0.782601] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 0.782930] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.782951] usbcore: registered new interface driver usbhid
[ 0.782951] usbhid: USB HID core driver
[ 0.783089] drop_monitor: Initializing network drop monitor service
[ 0.783564] Initializing XFRM netlink socket
[ 0.783728] NET: Registered protocol family 10
[ 0.785830] Segment Routing with IPv6
[ 0.785843] mip6: Mobile IPv6
[ 0.785844] NET: Registered protocol family 17
[ 0.787000] RAS: Correctable Errors collector initialized.
[ 0.789045] microcode: CPU0: patch_level=0x08001137
[ 0.789048] microcode: CPU1: patch_level=0x08001137
[ 0.789053] microcode: CPU2: patch_level=0x08001137
[ 0.789058] microcode: CPU3: patch_level=0x08001137
[ 0.789066] microcode: CPU4: patch_level=0x08001137
[ 0.789071] microcode: CPU5: patch_level=0x08001137
[ 0.789078] microcode: CPU6: patch_level=0x08001137
[ 0.789083] microcode: CPU7: patch_level=0x08001137
[ 0.789089] microcode: CPU8: patch_level=0x08001137
[ 0.789095] microcode: CPU9: patch_level=0x08001137
[ 0.789102] microcode: CPU10: patch_level=0x08001137
[ 0.789110] microcode: CPU11: patch_level=0x08001137
[ 0.789119] microcode: CPU12: patch_level=0x08001137
[ 0.789125] microcode: CPU13: patch_level=0x08001137
[ 0.789134] microcode: CPU14: patch_level=0x08001137
[ 0.789142] microcode: CPU15: patch_level=0x08001137
[ 0.789147] microcode: CPU16: patch_level=0x08001137
[ 0.789152] microcode: CPU17: patch_level=0x08001137
[ 0.789157] microcode: CPU18: patch_level=0x08001137
[ 0.789162] microcode: CPU19: patch_level=0x08001137
[ 0.789166] microcode: CPU20: patch_level=0x08001137
[ 0.789172] microcode: CPU21: patch_level=0x08001137
[ 0.789178] microcode: CPU22: patch_level=0x08001137
[ 0.789184] microcode: CPU23: patch_level=0x08001137
[ 0.789189] microcode: CPU24: patch_level=0x08001137
[ 0.789196] microcode: CPU25: patch_level=0x08001137
[ 0.789202] microcode: CPU26: patch_level=0x08001137
[ 0.789207] microcode: CPU27: patch_level=0x08001137
[ 0.789214] microcode: CPU28: patch_level=0x08001137
[ 0.789220] microcode: CPU29: patch_level=0x08001137
[ 0.789227] microcode: CPU30: patch_level=0x08001137
[ 0.789232] microcode: CPU31: patch_level=0x08001137
[ 0.789259] microcode: Microcode Update Driver: v2.2.
[ 0.789267] AVX2 version of gcm_enc/dec engaged.
[ 0.789267] AES CTR mode by8 optimization enabled
[ 0.796562] sched_clock: Marking stable (796555087, 0)->(967304418, -170749331)
[ 0.797298] registered taskstats version 1
[ 0.797306] Loading compiled-in X.509 certificates
[ 0.819940] Loaded X.509 cert 'Fedora kernel signing key: e6f292c78964456fa910a52a28608cd27ca5f788'
[ 0.821413] Loaded UEFI:db cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2' linked to secondary sys keyring
[ 0.821542] Loaded UEFI:db cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071' linked to secondary sys keyring
[ 0.821560] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[ 0.821574] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[ 0.821711] Loaded UEFI:db cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[ 0.823283] zswap: loaded using pool lzo/zbud
[ 0.826142] Key type big_key registered
[ 0.827217] Key type encrypted registered
[ 0.827222] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 0.827228] ima: Allocated hash algorithm: sha1
[ 0.827709] Magic number: 10:22:428
[ 0.827759] thermal cooling_device20: hash matches
[ 0.828059] rtc_cmos 00:02: setting system clock to 2018-11-06 11:25:40 UTC (1541503540)
[ 0.977838] ata10: SATA link down (SStatus 0 SControl 300)
[ 0.978010] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.978375] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.105042] usb 5-4: new low-speed USB device number 2 using xhci_hcd
[ 1.111037] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[ 1.271400] usb 5-4: New USB device found, idVendor=04ca, idProduct=004b, bcdDevice= 1.09
[ 1.271402] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.271403] usb 5-4: Product: USB Keyboard
[ 1.271403] usb 5-4: Manufacturer: Lite-On Technology Corp.
[ 1.284597] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.307561] input: Lite-On Technology Corp. USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:0b:00.3/usb5/5-4/5-4:1.0/0003:04CA:004B.0001/input/input2
[ 1.359126] hid-generic 0003:04CA:004B.0001: input,hidraw0: USB HID v1.10 Keyboard [Lite-On Technology Corp. USB Keyboard] on usb-0000:0b:00.3-4/input0
[ 1.369555] input: Lite-On Technology Corp. USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:0b:00.3/usb5/5-4/5-4:1.1/0003:04CA:004B.0002/input/input3
[ 1.393601] usb 1-2: New USB device found, idVendor=0b05, idProduct=1868, bcdDevice= 0.01
[ 1.393602] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.421097] input: Lite-On Technology Corp. USB Keyboard System Control as /devices/pci0000:00/0000:00:07.1/0000:0b:00.3/usb5/5-4/5-4:1.1/0003:04CA:004B.0002/input/input4
[ 1.421140] hid-generic 0003:04CA:004B.0002: input,hidraw1: USB HID v1.10 Device [Lite-On Technology Corp. USB Keyboard] on usb-0000:0b:00.3-4/input1
[ 1.567053] tsc: Refined TSC clocksource calibration: 3393.625 MHz
[ 1.567092] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30eac89f71e, max_idle_ns: 440795373609 ns
[ 1.567316] clocksource: Switched to clocksource tsc
[ 1.580023] usb 1-10: new full-speed USB device number 3 using xhci_hcd
[ 1.596688] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.908640] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.962732] usb 1-10: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
[ 1.962734] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.962734] usb 1-10: Product: USB Receiver
[ 1.962735] usb 1-10: Manufacturer: Logitech
[ 1.987562] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-10/1-10:1.0/0003:046D:C534.0003/input/input5
[ 2.039135] hid-generic 0003:046D:C534.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-10/input0
[ 2.064728] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-10/1-10:1.1/0003:046D:C534.0004/input/input6
[ 2.064956] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-10/1-10:1.1/0003:046D:C534.0004/input/input7
[ 2.116078] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-10/1-10:1.1/0003:046D:C534.0004/input/input8
[ 2.116144] hid-generic 0003:046D:C534.0004: input,hiddev96,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-10/input1
[ 2.292022] usb 1-11: new full-speed USB device number 4 using xhci_hcd
[ 2.367042] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.367541] ata5.00: ATA-8: KINGSTON SNV425S2128GB, D100309a, max UDMA/100
[ 2.367542] ata5.00: 250069680 sectors, multi 16: LBA48
[ 2.368039] ata5.00: configured for UDMA/100
[ 2.368302] scsi 4:0:0:0: Direct-Access ATA KINGSTON SNV425S 309a PQ: 0 ANSI: 5
[ 2.368415] sd 4:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 2.368421] sd 4:0:0:0: [sda] Write Protect is off
[ 2.368422] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.368428] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.368592] sd 4:0:0:0: Attached scsi generic sg0 type 0
[ 2.371062] sda: sda1 sda2 sda3
[ 2.371252] sd 4:0:0:0: [sda] Attached SCSI disk
[ 2.660792] usb 1-11: New USB device found, idVendor=0b05, idProduct=1867, bcdDevice= 2.00
[ 2.660794] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.660795] usb 1-11: Product: AURA Custom Human interface
[ 2.660795] usb 1-11: Manufacturer: AsusTek Computer Inc.
[ 2.660796] usb 1-11: SerialNumber: 00000000001A
[ 2.675794] hid-generic 0003:0B05:1867.0005: hiddev97,hidraw4: USB HID v1.11 Device [AsusTek Computer Inc. AURA Custom Human interface] on usb-0000:01:00.0-11/input0
[ 2.676592] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.980655] ata7: SATA link down (SStatus 0 SControl 300)
[ 3.284656] ata8: SATA link down (SStatus 0 SControl 300)
[ 3.565870] Freeing unused kernel image memory: 2160K
[ 3.571074] Write protecting the kernel read-only data: 18432k
[ 3.572587] Freeing unused kernel image memory: 2012K
[ 3.572698] Freeing unused kernel image memory: 40K
[ 3.579460] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 3.579465] rodata_test: all tests were successful
[ 3.656503] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 3.669584] systemd[1]: Detected architecture x86-64.
[ 3.669586] systemd[1]: Running in initial RAM disk.
[ 3.689963] systemd[1]: Set hostname to <localhost.localdomain>.
[ 3.727524] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.727578] systemd[1]: Listening on udev Kernel Socket.
[ 3.727628] systemd[1]: Listening on udev Control Socket.
[ 3.727634] systemd[1]: Reached target Swap.
[ 3.727693] systemd[1]: Listening on Journal Audit Socket.
[ 3.727700] systemd[1]: Reached target Timers.
[ 3.786345] audit: type=1130 audit(1541503543.457:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.786347] audit: type=1131 audit(1541503543.457:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.787829] audit: type=1130 audit(1541503543.458:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.803544] audit: type=1130 audit(1541503543.474:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.822628] audit: type=1130 audit(1541503543.493:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.837307] audit: type=1130 audit(1541503543.508:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.930291] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[ 3.932530] audit: type=1130 audit(1541503543.603:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.950362] audit: type=1130 audit(1541503543.621:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.976835] dca service started, version 1.12.1
[ 3.977545] nvme nvme0: pci function 0000:09:00.0
[ 3.989263] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 3.989264] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 4.087579] MXM: GUID detected in BIOS
[ 4.087809] checking generic (d1000000 384000) vs hw (c0000000 10000000)
[ 4.087810] checking generic (d1000000 384000) vs hw (d0000000 2000000)
[ 4.087811] fb: switching to nouveaufb from EFI VGA
[ 4.087929] nouveau 0000:0a:00.0: NVIDIA GP102 (132000a1)
[ 4.202851] nvme0n1: p1 p2 p3 p4 p5 p6
[ 4.206031] nouveau 0000:0a:00.0: bios: version 86.02.39.00.d2
[ 4.206981] nouveau 0000:0a:00.0: bios: M0203E type 08
[ 4.207053] nouveau 0000:0a:00.0: fb: 11264 MiB of unknown memory type
[ 4.260031] [TTM] Zone kernel: Available graphics memory: 16426798 kiB
[ 4.260032] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 4.260033] [TTM] Initializing pool allocator
[ 4.260037] [TTM] Initializing DMA pool allocator
[ 4.260048] nouveau 0000:0a:00.0: DRM: VRAM: 11264 MiB
[ 4.260049] nouveau 0000:0a:00.0: DRM: GART: 536870912 MiB
[ 4.260051] nouveau 0000:0a:00.0: DRM: BIT table 'A' not found
[ 4.260053] nouveau 0000:0a:00.0: DRM: BIT table 'L' not found
[ 4.260054] nouveau 0000:0a:00.0: DRM: TMDS table version 2.0
[ 4.260055] nouveau 0000:0a:00.0: DRM: DCB version 4.1
[ 4.260056] nouveau 0000:0a:00.0: DRM: DCB outp 00: 01000f42 00020030
[ 4.260058] nouveau 0000:0a:00.0: DRM: DCB outp 01: 04811f96 04600020
[ 4.260059] nouveau 0000:0a:00.0: DRM: DCB outp 02: 04011f92 00020020
[ 4.260060] nouveau 0000:0a:00.0: DRM: DCB outp 03: 04822f86 04600010
[ 4.260061] nouveau 0000:0a:00.0: DRM: DCB outp 04: 04022f82 00020010
[ 4.260061] nouveau 0000:0a:00.0: DRM: DCB outp 05: 02033f72 00020010
[ 4.260062] nouveau 0000:0a:00.0: DRM: DCB outp 06: 02044f62 00020020
[ 4.260063] nouveau 0000:0a:00.0: DRM: DCB conn 00: 00001031
[ 4.260064] nouveau 0000:0a:00.0: DRM: DCB conn 01: 02000146
[ 4.260065] nouveau 0000:0a:00.0: DRM: DCB conn 02: 01000246
[ 4.260065] nouveau 0000:0a:00.0: DRM: DCB conn 03: 00010361
[ 4.260066] nouveau 0000:0a:00.0: DRM: DCB conn 04: 00020461
[ 4.300071] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.300072] [drm] Driver supports precise vblank timestamp query.
[ 4.334465] pps pps0: new PPS source ptp0
[ 4.334467] igb 0000:05:00.0: added PHC on eth0
[ 4.334468] igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 4.334469] igb 0000:05:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 10:7b:44:93:2d:e2
[ 4.334470] igb 0000:05:00.0: eth0: PBA No: FFFFFF-0FF
[ 4.334471] igb 0000:05:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
[ 4.335907] igb 0000:05:00.0 enp5s0: renamed from eth0
[ 4.551481] nouveau 0000:0a:00.0: DRM: MM: using COPY for buffer copies
[ 5.118167] nouveau 0000:0a:00.0: DRM: allocated 1280x720 fb: 0x200000, bo 00000000f45057a2
[ 5.135043] fbcon: nouveaufb (fb0) is primary device
[ 5.135044] fbcon: Deferring console take-over
[ 5.135046] nouveau 0000:0a:00.0: fb0: nouveaufb frame buffer device
[ 5.151057] [drm] Initialized nouveau 1.3.1 20120801 for 0000:0a:00.0 on minor 0
[ 5.420614] PM: Image not found (code -22)
[ 5.421316] audit: type=1130 audit(1541503545.092:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-hibernate-resume@dev-mapper-fedora\x2dswap comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.421319] audit: type=1131 audit(1541503545.092:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-hibernate-resume@dev-mapper-fedora\x2dswap comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.427732] audit: type=1130 audit(1541503545.098:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.470777] audit: type=1130 audit(1541503545.141:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.514535] audit: type=1130 audit(1541503545.185:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.545534] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 5.637218] audit: type=1130 audit(1541503545.308:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.637222] audit: type=1131 audit(1541503545.308:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.767238] audit: type=1130 audit(1541503545.438:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.772940] audit: type=1131 audit(1541503545.443:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.773974] audit: type=1130 audit(1541503545.444:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.857799] systemd-journald[441]: Received SIGTERM from PID 1 (systemd).
[ 5.884937] systemd: 15 output lines suppressed due to ratelimiting
[ 6.105349] SELinux: 32768 avtab hash slots, 116360 rules.
[ 6.116633] SELinux: 32768 avtab hash slots, 116360 rules.
[ 6.324986] SELinux: 8 users, 14 roles, 5155 types, 324 bools, 1 sens, 1024 cats
[ 6.324989] SELinux: 130 classes, 116360 rules
[ 6.328770] SELinux: Class xdp_socket not defined in policy.
[ 6.328771] SELinux: the above unknown classes and permissions will be allowed
[ 6.328778] SELinux: policy capability network_peer_controls=1
[ 6.328778] SELinux: policy capability open_perms=1
[ 6.328778] SELinux: policy capability extended_socket_class=1
[ 6.328779] SELinux: policy capability always_check_network=0
[ 6.328779] SELinux: policy capability cgroup_seclabel=1
[ 6.328779] SELinux: policy capability nnp_nosuid_transition=1
[ 6.328780] SELinux: Completing initialization.
[ 6.328780] SELinux: Setting up existing superblocks.
[ 6.348991] systemd[1]: Successfully loaded SELinux policy in 294.553ms.
[ 6.362471] systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
[ 6.395481] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 22.815ms.
[ 6.399601] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 6.413376] systemd[1]: Detected architecture x86-64.
[ 6.414309] systemd[1]: Set hostname to <localhost.localdomain>.
[ 6.860699] systemd[1]: Stopped Switch Root.
[ 6.860881] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart.
[ 6.860931] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[ 6.860945] systemd[1]: Stopped Journal Service.
[ 6.862432] systemd[1]: Starting Journal Service...
[ 6.863314] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 6.863831] systemd[1]: Listening on udev Kernel Socket.
[ 6.875530] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 6.899266] Adding 12505084k swap on /dev/mapper/fedora-swap. Priority:-2 extents:1 across:12505084k SSFS
[ 6.941763] systemd-journald[835]: Received request to flush runtime journal from PID 1
[ 7.285345] acpi_cpufreq: overriding BIOS provided _PSD data
[ 7.392754] ccp 0000:0b:00.2: enabling device (0000 -> 0002)
[ 7.393874] ccp 0000:0b:00.2: enabled
[ 7.393970] ccp 0000:41:00.2: enabling device (0000 -> 0002)
[ 7.395662] ccp 0000:41:00.2: enabled
[ 7.405437] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 7.405440] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 7.427355] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 7.432504] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[ 7.432515] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[ 7.447846] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.448869] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.464801] asus_wmi: ASUS WMI generic driver loaded
[ 7.471738] asus_wmi: Initialization: 0x0
[ 7.471767] asus_wmi: BIOS WMI version: 0.9
[ 7.471801] asus_wmi: SFUN value: 0x0
[ 7.476217] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input11
[ 7.478151] asus_wmi: Number of fans: 1
[ 7.482245] wil6210 0000:04:00.0: wil6210 device found [1ae9:0310] (rev 2) bar size 0x200000
[ 7.482404] wil6210 0000:04:00.0: using dma mask 48
[ 7.482412] wil6210 0000:04:00.0: enabling device (0000 -> 0002)
[ 7.482556] wil6210 0000:04:00.0 (unnamed net_device) (uninitialized): wil_pcie_probe: CSR at [mem 0xd9200000-0xd93fffff 64bit] -> 0x0000000082e1126f
[ 7.482563] wil6210 0000:04:00.0 (unnamed net_device) (uninitialized): wil_set_capabilities: Board hardware is Sparrow B0, flash exist
[ 7.488899] wil6210 0000:04:00.0 (unnamed net_device) (uninitialized): wil_refresh_fw_capabilities: keep_radio_on_during_sleep (0)
[ 7.521435] Bluetooth: Core ver 2.22
[ 7.521491] NET: Registered protocol family 31
[ 7.521492] Bluetooth: HCI device and connection manager initialized
[ 7.521499] Bluetooth: HCI socket layer initialized
[ 7.521501] Bluetooth: L2CAP socket layer initialized
[ 7.521509] Bluetooth: SCO socket layer initialized
[ 7.538184] snd_hda_intel 0000:0a:00.1: Disabling MSI
[ 7.538210] snd_hda_intel 0000:0a:00.1: Handle vga_switcheroo audio client
[ 7.540170] snd_hda_intel 0000:0c:00.3: enabling device (0000 -> 0002)
[ 7.542075] wil6210 0000:04:00.0 (unnamed net_device) (uninitialized): wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 7.542077] wil6210 0000:04:00.0 (unnamed net_device) (uninitialized): wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 7.542079] wil6210 0000:04:00.0 (unnamed net_device) (uninitialized): wil_set_oob_mode: oob_mode to 0
[ 7.547594] usbcore: registered new interface driver btusb
[ 7.567238] ath10k_pci 0000:03:00.0: enabling device (0000 -> 0002)
[ 7.568173] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 7.584443] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 7.584445] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.584446] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 7.584447] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 7.584448] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 7.584449] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 7.584450] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 7.584451] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 7.584452] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 7.586524] wil6210 0000:04:00.0 wlp4s0: renamed from wlan0
[ 7.600677] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input12
[ 7.600764] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input13
[ 7.600814] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input14
[ 7.600865] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input15
[ 7.600917] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input16
[ 7.600961] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input17
[ 7.601022] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input18
[ 7.657359] kvm: Nested Virtualization enabled
[ 7.657386] kvm: Nested Paging enabled
[ 7.657387] SVM: Virtual VMLOAD VMSAVE supported
[ 7.657387] SVM: Virtual GIF supported
[ 7.662417] MCE: In-kernel MCE decoding enabled.
[ 7.668484] EDAC amd64: Node 0: DRAM ECC disabled.
[ 7.668487] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 7.668493] EDAC amd64: Node 1: DRAM ECC disabled.
[ 7.668494] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 7.807420] ath10k_pci 0000:03:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1043:8751
[ 7.807423] ath10k_pci 0000:03:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[ 7.808039] ath10k_pci 0000:03:00.0: firmware ver WLAN.RM.4.4.1-00079-QCARMSWPZ-1 api 6 features wowlan,ignore-otp crc32 fd869beb
[ 7.854243] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.872469] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.888034] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id N/A crc32 20d869c3
[ 8.043799] RPC: Registered named UNIX socket transport module.
[ 8.043800] RPC: Registered udp transport module.
[ 8.043801] RPC: Registered tcp transport module.
[ 8.043801] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.257379] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input19
[ 8.257545] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input20
[ 8.257625] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input21
[ 8.257713] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input22
[ 8.476863] ath10k_pci 0000:03:00.0: Unknown eventid: 118809
[ 8.479786] ath10k_pci 0000:03:00.0: Unknown eventid: 90118
[ 8.480418] ath10k_pci 0000:03:00.0: htt-ver 3.47 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 8.541706] ath: EEPROM regdomain: 0x6c
[ 8.541707] ath: EEPROM indicates we should expect a direct regpair map
[ 8.541709] ath: Country alpha2 being used: 00
[ 8.541709] ath: Regpair used: 0x6c
[ 8.555209] ath10k_pci 0000:03:00.0 wlp3s0: renamed from wlan0
[ 8.567962] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.567964] Bluetooth: BNEP filters: protocol multicast
[ 8.567971] Bluetooth: BNEP socket layer initialized
[ 9.533753] pcieport 0000:00:01.1: AER: Corrected error received: 0000:00:00.0
[ 9.533758] pcieport 0000:00:01.1: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID)
[ 9.533759] pcieport 0000:00:01.1: device [1022:1453] error status/mask=00000040/00006000
[ 9.533760] pcieport 0000:00:01.1: [ 6] Bad TLP
[ 9.596879] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 9.623471] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 9.628152] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 10.327259] ath10k_pci 0000:03:00.0: Unknown eventid: 118809
[ 10.330168] ath10k_pci 0000:03:00.0: Unknown eventid: 90118
[ 10.342256] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 11.105575] ath10k_pci 0000:03:00.0: Unknown eventid: 118809
[ 11.108495] ath10k_pci 0000:03:00.0: Unknown eventid: 90118
[ 11.120790] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 11.124316] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 11.124350] wil6210 0000:04:00.0 wlp4s0: _wil6210_disconnect: bssid= (null), reason=3, ev-
[ 11.175102] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 11.175105] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 11.175108] wil6210 0000:04:00.0 wlp4s0: wil_set_oob_mode: oob_mode to 0
[ 11.175112] wil6210 0000:04:00.0 wlp4s0: wil_reset: Use firmware <wil6210.fw> + board <wil6210.brd>
[ 11.191769] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_CNT_TRSH = 500 usec
[ 11.191773] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_IDL_CNT_TRSH = 13 usec
[ 11.191776] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_CNT_TRSH = 500 usec
[ 11.191778] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_IDL_CNT_TRSH = 13 usec
[ 11.366441] wil6210 0000:04:00.0 wlp4s0: wmi_evt_ready: FW ver. 5.2.0.18(SW 18); MAC dc:ef:ca:e2:d8:09; 0 MID's
[ 11.366463] wil6210 0000:04:00.0 wlp4s0: wil_wait_for_fw_ready: FW ready after 175 ms. HW version 0x00000001
[ 11.366690] wil6210 0000:04:00.0 wlp4s0: wil_refresh_fw_capabilities: keep_radio_on_during_sleep (0)
[ 11.367637] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 11.368157] wil6210 0000:04:00.0 wlp4s0: _wil6210_disconnect: bssid= (null), reason=3, ev-
[ 11.419408] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 11.419411] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 11.419414] wil6210 0000:04:00.0 wlp4s0: wil_set_oob_mode: oob_mode to 0
[ 11.420257] wil6210 0000:04:00.0 wlp4s0: _wil6210_disconnect: bssid= (null), reason=3, ev-
[ 11.471105] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 11.471108] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 11.471110] wil6210 0000:04:00.0 wlp4s0: wil_set_oob_mode: oob_mode to 0
[ 11.471114] wil6210 0000:04:00.0 wlp4s0: wil_reset: Use firmware <wil6210.fw> + board <wil6210.brd>
[ 11.486885] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_CNT_TRSH = 500 usec
[ 11.486887] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_IDL_CNT_TRSH = 13 usec
[ 11.486890] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_CNT_TRSH = 500 usec
[ 11.486892] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_IDL_CNT_TRSH = 13 usec
[ 11.495064] wil6210 0000:04:00.0 wlp4s0: wmi_evt_ready: FW ver. 5.2.0.18(SW 18); MAC dc:ef:ca:e2:d8:09; 0 MID's
[ 11.495199] wil6210 0000:04:00.0 wlp4s0: wil_wait_for_fw_ready: FW ready after 9 ms. HW version 0x00000001
[ 11.495341] wil6210 0000:04:00.0 wlp4s0: wil_refresh_fw_capabilities: keep_radio_on_during_sleep (0)
[ 11.496126] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 11.581840] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 11.583532] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 12.560568] igb 0000:05:00.0 enp5s0: igb: enp5s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 12.663263] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[ 74.115205] Bluetooth: RFCOMM TTY layer initialized
[ 74.115211] Bluetooth: RFCOMM socket layer initialized
[ 74.115247] Bluetooth: RFCOMM ver 1.11
[ 74.513467] fuse init (API version 7.27)
[ 76.816485] rfkill: input handler disabled
[ 356.030316] wil6210 0000:04:00.0 wlp4s0: _wil6210_disconnect: bssid= (null), reason=3, ev-
[ 356.081428] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 356.081431] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 356.081433] wil6210 0000:04:00.0 wlp4s0: wil_set_oob_mode: oob_mode to 0
[ 356.081977] wil6210 0000:04:00.0 wlp4s0: _wil6210_disconnect: bssid= (null), reason=3, ev-
[ 356.133098] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 356.133101] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 356.133103] wil6210 0000:04:00.0 wlp4s0: wil_set_oob_mode: oob_mode to 0
[ 356.133107] wil6210 0000:04:00.0 wlp4s0: wil_reset: Use firmware <wil6210.fw> + board <wil6210.brd>
[ 356.148749] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_CNT_TRSH = 500 usec
[ 356.148752] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_IDL_CNT_TRSH = 13 usec
[ 356.148754] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_CNT_TRSH = 500 usec
[ 356.148756] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_IDL_CNT_TRSH = 13 usec
[ 356.156930] wil6210 0000:04:00.0 wlp4s0: wmi_evt_ready: FW ver. 5.2.0.18(SW 18); MAC dc:ef:ca:e2:d8:09; 0 MID's
[ 356.156948] wil6210 0000:04:00.0 wlp4s0: wil_wait_for_fw_ready: FW ready after 8 ms. HW version 0x00000001
[ 356.157216] wil6210 0000:04:00.0 wlp4s0: wil_refresh_fw_capabilities: keep_radio_on_during_sleep (0)
[ 356.157974] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 358.766225] ath10k_pci 0000:03:00.0: Unknown eventid: 118809
[ 358.769147] ath10k_pci 0000:03:00.0: Unknown eventid: 90118
[ 358.781522] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 671.020834] wil6210 0000:04:00.0 wlp4s0: _wil6210_disconnect: bssid= (null), reason=3, ev-
[ 671.071416] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 671.071419] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 671.071421] wil6210 0000:04:00.0 wlp4s0: wil_set_oob_mode: oob_mode to 0
[ 671.072109] wil6210 0000:04:00.0 wlp4s0: _wil6210_disconnect: bssid= (null), reason=3, ev-
[ 671.123066] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 671.123070] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 671.123072] wil6210 0000:04:00.0 wlp4s0: wil_set_oob_mode: oob_mode to 0
[ 671.123075] wil6210 0000:04:00.0 wlp4s0: wil_reset: Use firmware <wil6210.fw> + board <wil6210.brd>
[ 671.138734] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_CNT_TRSH = 500 usec
[ 671.138737] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_IDL_CNT_TRSH = 13 usec
[ 671.138739] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_CNT_TRSH = 500 usec
[ 671.138742] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_IDL_CNT_TRSH = 13 usec
[ 671.146910] wil6210 0000:04:00.0 wlp4s0: wmi_evt_ready: FW ver. 5.2.0.18(SW 18); MAC dc:ef:ca:e2:d8:09; 0 MID's
[ 671.146940] wil6210 0000:04:00.0 wlp4s0: wil_wait_for_fw_ready: FW ready after 8 ms. HW version 0x00000001
[ 671.147198] wil6210 0000:04:00.0 wlp4s0: wil_refresh_fw_capabilities: keep_radio_on_during_sleep (0)
[ 671.147988] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 674.767129] ath10k_pci 0000:03:00.0: Unknown eventid: 118809
[ 674.770044] ath10k_pci 0000:03:00.0: Unknown eventid: 90118
[ 674.782544] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 986.055584] wil6210 0000:04:00.0 wlp4s0: _wil6210_disconnect: bssid= (null), reason=3, ev-
[ 986.106432] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 986.106436] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 986.106438] wil6210 0000:04:00.0 wlp4s0: wil_set_oob_mode: oob_mode to 0
[ 986.106991] wil6210 0000:04:00.0 wlp4s0: _wil6210_disconnect: bssid= (null), reason=3, ev-
[ 986.158059] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 986.158062] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 986.158064] wil6210 0000:04:00.0 wlp4s0: wil_set_oob_mode: oob_mode to 0
[ 986.158068] wil6210 0000:04:00.0 wlp4s0: wil_reset: Use firmware <wil6210.fw> + board <wil6210.brd>
[ 986.173780] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_CNT_TRSH = 500 usec
[ 986.173783] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_IDL_CNT_TRSH = 13 usec
[ 986.173786] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_CNT_TRSH = 500 usec
[ 986.173788] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_IDL_CNT_TRSH = 13 usec
[ 986.181957] wil6210 0000:04:00.0 wlp4s0: wmi_evt_ready: FW ver. 5.2.0.18(SW 18); MAC dc:ef:ca:e2:d8:09; 0 MID's
[ 986.181987] wil6210 0000:04:00.0 wlp4s0: wil_wait_for_fw_ready: FW ready after 9 ms. HW version 0x00000001
[ 986.182237] wil6210 0000:04:00.0 wlp4s0: wil_refresh_fw_capabilities: keep_radio_on_during_sleep (0)
[ 986.182873] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 990.769185] ath10k_pci 0000:03:00.0: Unknown eventid: 118809
[ 990.772106] ath10k_pci 0000:03:00.0: Unknown eventid: 90118
[ 990.783760] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1301.009649] wil6210 0000:04:00.0 wlp4s0: _wil6210_disconnect: bssid= (null), reason=3, ev-
[ 1301.060433] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 1301.060436] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 1301.060438] wil6210 0000:04:00.0 wlp4s0: wil_set_oob_mode: oob_mode to 0
[ 1301.060988] wil6210 0000:04:00.0 wlp4s0: _wil6210_disconnect: bssid= (null), reason=3, ev-
[ 1301.112061] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 1301.112064] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 1301.112066] wil6210 0000:04:00.0 wlp4s0: wil_set_oob_mode: oob_mode to 0
[ 1301.112070] wil6210 0000:04:00.0 wlp4s0: wil_reset: Use firmware <wil6210.fw> + board <wil6210.brd>
[ 1301.127728] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_CNT_TRSH = 500 usec
[ 1301.127731] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_IDL_CNT_TRSH = 13 usec
[ 1301.127733] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_CNT_TRSH = 500 usec
[ 1301.127735] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_IDL_CNT_TRSH = 13 usec
[ 1301.135903] wil6210 0000:04:00.0 wlp4s0: wmi_evt_ready: FW ver. 5.2.0.18(SW 18); MAC dc:ef:ca:e2:d8:09; 0 MID's
[ 1301.135933] wil6210 0000:04:00.0 wlp4s0: wil_wait_for_fw_ready: FW ready after 8 ms. HW version 0x00000001
[ 1301.136190] wil6210 0000:04:00.0 wlp4s0: wil_refresh_fw_capabilities: keep_radio_on_during_sleep (0)
[ 1301.136856] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 1306.767931] ath10k_pci 0000:03:00.0: Unknown eventid: 118809
[ 1306.770864] ath10k_pci 0000:03:00.0: Unknown eventid: 90118
[ 1306.782785] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1616.053065] wil6210 0000:04:00.0 wlp4s0: _wil6210_disconnect: bssid= (null), reason=3, ev-
[ 1616.104424] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 1616.104427] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 1616.104429] wil6210 0000:04:00.0 wlp4s0: wil_set_oob_mode: oob_mode to 0
[ 1616.105316] wil6210 0000:04:00.0 wlp4s0: _wil6210_disconnect: bssid= (null), reason=3, ev-
[ 1616.156050] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 1616.156054] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 1616.156055] wil6210 0000:04:00.0 wlp4s0: wil_set_oob_mode: oob_mode to 0
[ 1616.156059] wil6210 0000:04:00.0 wlp4s0: wil_reset: Use firmware <wil6210.fw> + board <wil6210.brd>
[ 1616.171810] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_CNT_TRSH = 500 usec
[ 1616.171813] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_IDL_CNT_TRSH = 13 usec
[ 1616.171815] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_CNT_TRSH = 500 usec
[ 1616.171817] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_IDL_CNT_TRSH = 13 usec
[ 1616.179989] wil6210 0000:04:00.0 wlp4s0: wmi_evt_ready: FW ver. 5.2.0.18(SW 18); MAC dc:ef:ca:e2:d8:09; 0 MID's
[ 1616.180023] wil6210 0000:04:00.0 wlp4s0: wil_wait_for_fw_ready: FW ready after 9 ms. HW version 0x00000001
[ 1616.180267] wil6210 0000:04:00.0 wlp4s0: wil_refresh_fw_capabilities: keep_radio_on_during_sleep (0)
[ 1616.180925] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 1622.770299] ath10k_pci 0000:03:00.0: Unknown eventid: 118809
[ 1622.773222] ath10k_pci 0000:03:00.0: Unknown eventid: 90118
[ 1622.785199] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1931.005080] wil6210 0000:04:00.0 wlp4s0: _wil6210_disconnect: bssid= (null), reason=3, ev-
[ 1931.056411] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 1931.056415] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 1931.056417] wil6210 0000:04:00.0 wlp4s0: wil_set_oob_mode: oob_mode to 0
[ 1931.056924] wil6210 0000:04:00.0 wlp4s0: _wil6210_disconnect: bssid= (null), reason=3, ev-
[ 1931.108034] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 1931.108037] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 1931.108039] wil6210 0000:04:00.0 wlp4s0: wil_set_oob_mode: oob_mode to 0
[ 1931.108043] wil6210 0000:04:00.0 wlp4s0: wil_reset: Use firmware <wil6210.fw> + board <wil6210.brd>
[ 1931.123784] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_CNT_TRSH = 500 usec
[ 1931.123787] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_IDL_CNT_TRSH = 13 usec
[ 1931.123789] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_CNT_TRSH = 500 usec
[ 1931.123791] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_IDL_CNT_TRSH = 13 usec
[ 1931.131979] wil6210 0000:04:00.0 wlp4s0: wmi_evt_ready: FW ver. 5.2.0.18(SW 18); MAC dc:ef:ca:e2:d8:09; 0 MID's
[ 1931.131995] wil6210 0000:04:00.0 wlp4s0: wil_wait_for_fw_ready: FW ready after 9 ms. HW version 0x00000001
[ 1931.132237] wil6210 0000:04:00.0 wlp4s0: wil_refresh_fw_capabilities: keep_radio_on_during_sleep (0)
[ 1931.133024] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 1938.772201] ath10k_pci 0000:03:00.0: Unknown eventid: 118809
[ 1938.775121] ath10k_pci 0000:03:00.0: Unknown eventid: 90118
[ 1938.787684] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2246.051072] wil6210 0000:04:00.0 wlp4s0: _wil6210_disconnect: bssid= (null), reason=3, ev-
[ 2246.102409] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 2246.102412] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 2246.102414] wil6210 0000:04:00.0 wlp4s0: wil_set_oob_mode: oob_mode to 0
[ 2246.103043] wil6210 0000:04:00.0 wlp4s0: _wil6210_disconnect: bssid= (null), reason=3, ev-
[ 2246.154030] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 2246.154033] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 2246.154035] wil6210 0000:04:00.0 wlp4s0: wil_set_oob_mode: oob_mode to 0
[ 2246.154039] wil6210 0000:04:00.0 wlp4s0: wil_reset: Use firmware <wil6210.fw> + board <wil6210.brd>
[ 2246.169774] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_CNT_TRSH = 500 usec
[ 2246.169777] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_IDL_CNT_TRSH = 13 usec
[ 2246.169780] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_CNT_TRSH = 500 usec
[ 2246.169782] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_IDL_CNT_TRSH = 13 usec
[ 2246.177948] wil6210 0000:04:00.0 wlp4s0: wmi_evt_ready: FW ver. 5.2.0.18(SW 18); MAC dc:ef:ca:e2:d8:09; 0 MID's
[ 2246.177957] wil6210 0000:04:00.0 wlp4s0: wil_wait_for_fw_ready: FW ready after 9 ms. HW version 0x00000001
[ 2246.178228] wil6210 0000:04:00.0 wlp4s0: wil_refresh_fw_capabilities: keep_radio_on_during_sleep (0)
[ 2246.179017] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 2254.771281] ath10k_pci 0000:03:00.0: Unknown eventid: 118809
[ 2254.774200] ath10k_pci 0000:03:00.0: Unknown eventid: 90118
[ 2254.786269] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2561.050172] wil6210 0000:04:00.0 wlp4s0: _wil6210_disconnect: bssid= (null), reason=3, ev-
[ 2561.101432] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 2561.101435] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 2561.101437] wil6210 0000:04:00.0 wlp4s0: wil_set_oob_mode: oob_mode to 0
[ 2561.102046] wil6210 0000:04:00.0 wlp4s0: _wil6210_disconnect: bssid= (null), reason=3, ev-
[ 2561.153017] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 2561.153020] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 2561.153022] wil6210 0000:04:00.0 wlp4s0: wil_set_oob_mode: oob_mode to 0
[ 2561.153026] wil6210 0000:04:00.0 wlp4s0: wil_reset: Use firmware <wil6210.fw> + board <wil6210.brd>
[ 2561.168759] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_CNT_TRSH = 500 usec
[ 2561.168762] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_IDL_CNT_TRSH = 13 usec
[ 2561.168765] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_CNT_TRSH = 500 usec
[ 2561.168767] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_IDL_CNT_TRSH = 13 usec
[ 2561.176937] wil6210 0000:04:00.0 wlp4s0: wmi_evt_ready: FW ver. 5.2.0.18(SW 18); MAC dc:ef:ca:e2:d8:09; 0 MID's
[ 2561.176946] wil6210 0000:04:00.0 wlp4s0: wil_wait_for_fw_ready: FW ready after 9 ms. HW version 0x00000001
[ 2561.177210] wil6210 0000:04:00.0 wlp4s0: wil_refresh_fw_capabilities: keep_radio_on_during_sleep (0)
[ 2561.177827] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 2570.774013] ath10k_pci 0000:03:00.0: Unknown eventid: 118809
[ 2570.776938] ath10k_pci 0000:03:00.0: Unknown eventid: 90118
[ 2570.788671] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2876.049049] wil6210 0000:04:00.0 wlp4s0: _wil6210_disconnect: bssid= (null), reason=3, ev-
[ 2876.100390] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 2876.100393] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 2876.100395] wil6210 0000:04:00.0 wlp4s0: wil_set_oob_mode: oob_mode to 0
[ 2876.100910] wil6210 0000:04:00.0 wlp4s0: _wil6210_disconnect: bssid= (null), reason=3, ev-
[ 2876.152005] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 2876.152009] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 2876.152010] wil6210 0000:04:00.0 wlp4s0: wil_set_oob_mode: oob_mode to 0
[ 2876.152015] wil6210 0000:04:00.0 wlp4s0: wil_reset: Use firmware <wil6210.fw> + board <wil6210.brd>
[ 2876.167721] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_CNT_TRSH = 500 usec
[ 2876.167724] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_IDL_CNT_TRSH = 13 usec
[ 2876.167727] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_CNT_TRSH = 500 usec
[ 2876.167729] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_IDL_CNT_TRSH = 13 usec
[ 2876.175905] wil6210 0000:04:00.0 wlp4s0: wmi_evt_ready: FW ver. 5.2.0.18(SW 18); MAC dc:ef:ca:e2:d8:09; 0 MID's
[ 2876.175940] wil6210 0000:04:00.0 wlp4s0: wil_wait_for_fw_ready: FW ready after 9 ms. HW version 0x00000001
[ 2876.176179] wil6210 0000:04:00.0 wlp4s0: wil_refresh_fw_capabilities: keep_radio_on_during_sleep (0)
[ 2876.176877] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 2886.775297] ath10k_pci 0000:03:00.0: Unknown eventid: 118809
[ 2886.778218] ath10k_pci 0000:03:00.0: Unknown eventid: 90118
[ 2886.790487] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3191.048284] wil6210 0000:04:00.0 wlp4s0: _wil6210_disconnect: bssid= (null), reason=3, ev-
[ 3191.099397] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 3191.099400] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 3191.099402] wil6210 0000:04:00.0 wlp4s0: wil_set_oob_mode: oob_mode to 0
[ 3191.100029] wil6210 0000:04:00.0 wlp4s0: _wil6210_disconnect: bssid= (null), reason=3, ev-
[ 3191.150990] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader struct v2: MAC = dc:ef:ca:e2:d8:09 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 3191.150993] wil6210 0000:04:00.0 wlp4s0: wil_get_bl_info: Boot Loader build 255.255.0.6836
[ 3191.150995] wil6210 0000:04:00.0 wlp4s0: wil_set_oob_mode: oob_mode to 0
[ 3191.150999] wil6210 0000:04:00.0 wlp4s0: wil_reset: Use firmware <wil6210.fw> + board <wil6210.brd>
[ 3191.166739] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_CNT_TRSH = 500 usec
[ 3191.166742] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_TX_IDL_CNT_TRSH = 13 usec
[ 3191.166744] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_CNT_TRSH = 500 usec
[ 3191.166746] wil6210 0000:04:00.0 wlp4s0: wil_configure_interrupt_moderation: set ITR_RX_IDL_CNT_TRSH = 13 usec
[ 3191.174917] wil6210 0000:04:00.0 wlp4s0: wmi_evt_ready: FW ver. 5.2.0.18(SW 18); MAC dc:ef:ca:e2:d8:09; 0 MID's
[ 3191.174950] wil6210 0000:04:00.0 wlp4s0: wil_wait_for_fw_ready: FW ready after 9 ms. HW version 0x00000001
[ 3191.175196] wil6210 0000:04:00.0 wlp4s0: wil_refresh_fw_capabilities: keep_radio_on_during_sleep (0)
[ 3191.175977] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 3202.774967] ath10k_pci 0000:03:00.0: Unknown eventid: 118809
[ 3202.777911] ath10k_pci 0000:03:00.0: Unknown eventid: 90118
[ 3202.790034] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
One thought on “Technical details of a default Fedora 29 Workstation installation”