AVAGO MegaRAID SAS-9361-4i with CacheCade – create a new virtual drive RAID5 with SSD caching

Here is howto article for creating a RAID5 device in MegaRAID SAS-9361-4i with SSD caching. First and really important thing is to have the CacheCade ability to the controller, which should be purchased because it is a software add-on.
To have an SSD caching your virtual raid drive (probably hard disk drives) with a MegaRAID controller one setup is the following:

  1. LSI LSI00415 MegaRAID 9361-4i SGL
  2. LSI LSI00293

And it is advisable to have Cache Protection to protect your setup (it is extra protection to the battery kit – it is not the same) – LSI LSI00418 LSICVM02.

You can check also our AVAGO MegaRaid SAS 9361-4i with CacheCade and CacheVault BIOS configuration utilities review.

Here are the steps to create a RAID5 device with SSD caching using the BIOS Configuration Utility:

STEP 1) Supermicro device initialization

main menu
Start up your server

Keep on reading!

AVAGO MegaRaid SAS 9361-4i with CacheCade and CacheVault BIOS configuration utilities review

Here is the screenshots’ review of LSI LSI00415 MegaRAID 9361-4i SGL controller with CacheVault Accessory kit LSI LSI00293. The controller has 3 hard disk and an SSD for the cache vault.
As you can see we use LSI, but in deed this is the AVAGO controller. First it was LSI, which was acquired by AVAGO and then AVAGO acquired Broadcom and rebranded to Broadcom. It is good to know it how these names are connected, because any controllers still use them in BIOS, management console cli, manuals and so on. You are going to see that in the controller’s BIOS and controller initialization boot up you can read only AVAGO – no LSI or Broadcom. Probably the most famous and familiar name of the three company names is LSI (hardware controller).
The screenshots are from the BIOS of “LSI LSI00415 MegaRAID 9361-4i SGL” with LSI LSI00293, CacheCade and LSI LSI00418 LSICVM02 – CacheVault Accessory kit.

So as you see you need two additional features to have a SSD as a cache device in your LSI (AVAGO/Broadcom) controller!

Check out our article AVAGO MegaRAID SAS-9361-4i with CacheCade – create a new virtual drive RAID5 with SSD caching.

SCREENSHOT 1) Booting the controller and checking the devices.

main menu
LSI controller Booting

Keep on reading!