Tag: crypto

This howto is made to show you how to run a full Groestlcoin node. To run a Groestlcoin node we need the official Groestlcoin daemon software:

groestlcoind

from the Groestlcoin Core package: https://www.groestlcoin.org/groestlcoin-core-wallet/ This program will start and wait for the network synchronization – our Groestlcoin node will receive all the blockchains of the network!
Installing (or compiling it) the Groestlcoin Core software of the official site will ensure you have the right software for generating and sending/receiving transactions securely and privately! Always use your node software for generating the Groestlcoin wallet address, DO NOT TRUST any sites, which offer you a creation of Groestlcoin wallet. In crypto world the one how controls the private key of the wallet (which is generated with the creation of the wallet) controls the Groestlcoin wallet address so controls your funds! It is so important that we repeat it in EVERY cryptocurrency howto! Just Install or compile a Groestlcoin Core node software – Running a Groestlcoin node (cli) from source under Ubuntu 16 LTS and you’ll everything you need to manage your Groestlcoin funds!
It’s worth mentioning again this section of Groestlcoin (Wallet) node howto:
And also be warned DO NOT use insecure sources when:

1. installing Ubuntu, install it from a cd/dvd/usb downloaded from the official Ubuntu site here.
2. installing all the needed dependencies from official sources only, not recommended the PPA reposigories, neither!
3. install yourself the “groestlcoind” program (the official Groestlcoin software), which will create an Groestlcoin node and after network synchronization could be used to create an Groestlcoin node.

Three simple rules could almost eliminate leaking your private key to hackers, which in blockchain world means losing your money…

With Groestlcoin you can still use ordinary hard drive, but it will be much slower than SSDs.

USE SSD

STEP 1) Install Ubuntu 16 – our howto will be available soon here.

STEP 2) Building from source an Groestlcoin (Wallet) node

Check out our howto “Running a Groestlcoin node (cli) from source under Ubuntu 16 LTS“.

STEP 3) Start the Groestlcoin node

if you have followed the howto in STEP 2) you probably have “groestlcoind” installed in “~/groestlcoin-core/bin”, so run it with:

ubuntu@srv.local:~/groestlcoin-core/bin$ ./groestlcoind &> ./groestlcoind.log

It is a good practice to run it with screen and in an infinite loop – if the program crashes it will start automatically and you’ll always have a synchronized node, of course, if you do not need a Groestlcoin (wallet) node running all the time the infinite loop is not needed. The user could just start the node, wait for synchronization and then make your transactions and stop the node, after several days you can start it up the catching up the synchronization won’t take much time:

ubuntu@srv.local:~$ screen -R groestlcoin
ubuntu@srv.local:~$ cd groestlcoin-core/bin/
ubuntu@srv.local:~/groestlcoin-core/bin$ while true; do ./groestlcoind &> ./groestlcoind.log;done

STEP 3) Wait for the blockchain network synchronization

This step could take significant amount of time, server resources and network bandwidth! USE SSD(s) for your home directory, because the blockchain database will be saved at your

home directory/.groestlcoin/

If you want to move it on another server or directory (or device) you must copy this directory to the new location.
When you run “groestlcoind” it will check the current state of the network and the current state of your groestlcoin (wallet) node, so no matter it is started for the first time or not a network synchronization is needed, your node need to be synchronized with the groestlcoin network to be used for all kind of actions in the network (create a wallet, transfer funds and more).
Here is the “~/.groestlcoin” direcotry:

srv@local:~$ ls -altr .groestlcoin/
total 24356
drwxr-xr-x 7 ubuntu ubuntu     4096 Mar 27 21:41 ..
-rw------- 1 ubuntu ubuntu        0 Mar 27 21:41 .lock
-rw------- 1 ubuntu ubuntu        6 Mar 27 21:41 groestlcoin.pid
-rw------- 1 ubuntu ubuntu        0 Mar 27 21:41 db.log
-rw------- 1 ubuntu ubuntu       75 Mar 27 21:41 .cookie
drwx------ 2 ubuntu ubuntu     4096 Mar 27 21:41 chainstate
drwx------ 3 ubuntu ubuntu     4096 Mar 27 21:41 blocks
drwx------ 2 ubuntu ubuntu     4096 Mar 27 21:41 database
-rw------- 1 ubuntu ubuntu    90112 Mar 27 21:41 wallet.dat
-rw------- 1 ubuntu ubuntu     1106 Mar 27 21:41 peers.dat
-rw------- 1 ubuntu ubuntu       37 Mar 27 21:41 banlist.dat
drwxrwxr-x 5 ubuntu ubuntu     4096 Mar 27 21:41 .
-rw------- 1 ubuntu ubuntu 24809419 Mar 27 21:48 debug.log
srv@local:~$ 

You can monitor all activity and synchronization of the groestlcoin (wallet) node in

debug.log

Here is the log of the node start:

2018-03-27 21:41:57 Groestlcoin version v2.13.3
2018-03-27 21:41:57 InitParameterInteraction: parameter interaction: -whitelistforcerelay=1 -> setting -whitelistrelay=1
2018-03-27 21:41:57 Default data directory /home/ubuntu/.groestlcoin
2018-03-27 21:41:57 Using data directory /home/ubuntu/.groestlcoin
2018-03-27 21:41:57 Using config file /home/ubuntu/.groestlcoin/groestlcoin.conf
2018-03-27 21:41:57 Using at most 125 connections (1024 file descriptors available)
2018-03-27 21:41:57 Using 32 MiB out of 32 requested for signature cache, able to store 1048576 elements
2018-03-27 21:41:57 Using 4 threads for script verification
2018-03-27 21:41:57 scheduler thread start
2018-03-27 21:41:57 HTTP: creating work queue of depth 16
2018-03-27 21:41:57 No rpcpassword set - using random cookie authentication
2018-03-27 21:41:57 Generated RPC authentication cookie /home/ubuntu/.groestlcoin/.cookie
2018-03-27 21:41:57 HTTP: starting 4 worker threads
2018-03-27 21:41:57 Using BerkeleyDB version Berkeley DB 5.3.28: (September  9, 2013)
2018-03-27 21:41:57 Using wallet wallet.dat
2018-03-27 21:41:57 init message: Verifying wallet...
2018-03-27 21:41:57 CDBEnv::Open: LogDir=/home/ubuntu/.groestlcoin/database ErrorFile=/home/ubuntu/.groestlcoin/db.log
2018-03-27 21:41:57 Bound to [::]:1331
2018-03-27 21:41:57 Bound to 0.0.0.0:1331
2018-03-27 21:41:57 Cache configuration:
2018-03-27 21:41:57 * Using 2.0MiB for block index database
2018-03-27 21:41:57 * Using 8.0MiB for chain state database
2018-03-27 21:41:57 * Using 290.0MiB for in-memory UTXO set
2018-03-27 21:41:57 init message: Loading block index...
2018-03-27 21:41:57 Opening LevelDB in /home/ubuntu/.groestlcoin/blocks/index
2018-03-27 21:41:57 Opened LevelDB successfully
2018-03-27 21:41:57 Using obfuscation key for /home/ubuntu/.groestlcoin/blocks/index: 0000000000000000
2018-03-27 21:41:57 Opening LevelDB in /home/ubuntu/.groestlcoin/chainstate
2018-03-27 21:41:57 Opened LevelDB successfully
2018-03-27 21:41:57 Using obfuscation key for /home/ubuntu/.groestlcoin/chainstate: 0000000000000000
2018-03-27 21:41:57 LoadBlockIndexDB: last block file = 0
2018-03-27 21:41:57 LoadBlockIndexDB: last block file info: CBlockFileInfo(blocks=0, size=0, heights=0...0, time=1970-01-01...1970-01-01)
2018-03-27 21:41:57 Checking all blk files are present...
2018-03-27 21:41:57 LoadBlockIndexDB: transaction index disabled
2018-03-27 21:41:57 Initializing databases...
2018-03-27 21:41:57 Pre-allocating up to position 0x1000000 in blk00000.dat
2018-03-27 21:41:57 init message: Verifying blocks...
2018-03-27 21:41:57  block index              18ms
2018-03-27 21:41:57 init message: Loading wallet...
2018-03-27 21:41:57 nFileVersion = 2130300
2018-03-27 21:41:57 Keys: 0 plaintext, 0 encrypted, 0 w/ metadata, 0 total
2018-03-27 21:41:57 Performing wallet upgrade to 60000
2018-03-27 21:41:57 keypool added key 1, size=1
2018-03-27 21:41:57 keypool added key 2, size=2
2018-03-27 21:41:57 keypool added key 3, size=3
2018-03-27 21:41:57 keypool added key 4, size=4
2018-03-27 21:41:57 keypool added key 5, size=5
2018-03-27 21:41:57 keypool added key 6, size=6
2018-03-27 21:41:57 keypool added key 7, size=7
2018-03-27 21:41:57 keypool added key 8, size=8
2018-03-27 21:41:57 keypool added key 9, size=9
2018-03-27 21:41:57 keypool added key 10, size=10
2018-03-27 21:41:57 keypool added key 11, size=11
2018-03-27 21:41:57 keypool added key 12, size=12
2018-03-27 21:41:57 keypool added key 13, size=13
2018-03-27 21:41:57 keypool added key 14, size=14
2018-03-27 21:41:57 keypool added key 15, size=15
2018-03-27 21:41:57 keypool added key 16, size=16
2018-03-27 21:41:57 keypool added key 17, size=17
2018-03-27 21:41:57 keypool added key 18, size=18
2018-03-27 21:41:57 keypool added key 19, size=19
2018-03-27 21:41:57 keypool added key 20, size=20
2018-03-27 21:41:57 keypool added key 21, size=21
2018-03-27 21:41:57 keypool added key 22, size=22
2018-03-27 21:41:57 keypool added key 23, size=23
2018-03-27 21:41:57 keypool added key 24, size=24
2018-03-27 21:41:57 keypool added key 25, size=25
2018-03-27 21:41:57 keypool added key 26, size=26
2018-03-27 21:41:58 keypool added key 27, size=27
2018-03-27 21:41:58 keypool added key 28, size=28
2018-03-27 21:41:58 keypool added key 29, size=29
2018-03-27 21:41:58 keypool added key 30, size=30
2018-03-27 21:41:58 keypool added key 31, size=31
2018-03-27 21:41:58 keypool added key 32, size=32
2018-03-27 21:41:58 keypool added key 33, size=33
2018-03-27 21:41:58 keypool added key 34, size=34
2018-03-27 21:41:58 keypool added key 35, size=35
2018-03-27 21:41:58 keypool added key 36, size=36
2018-03-27 21:41:58 keypool added key 37, size=37
2018-03-27 21:41:58 keypool added key 38, size=38
2018-03-27 21:41:58 keypool added key 39, size=39
2018-03-27 21:41:58 keypool added key 40, size=40
2018-03-27 21:41:58 keypool added key 41, size=41
2018-03-27 21:41:58 keypool added key 42, size=42
2018-03-27 21:41:58 keypool added key 43, size=43
2018-03-27 21:41:58 keypool added key 44, size=44
2018-03-27 21:41:58 keypool added key 45, size=45
2018-03-27 21:41:58 keypool added key 46, size=46
2018-03-27 21:41:58 keypool added key 47, size=47
2018-03-27 21:41:58 keypool added key 48, size=48
2018-03-27 21:41:58 keypool added key 49, size=49
2018-03-27 21:41:58 keypool added key 50, size=50
2018-03-27 21:41:58 keypool added key 51, size=51
2018-03-27 21:41:58 keypool added key 52, size=52
2018-03-27 21:41:58 keypool added key 53, size=53
2018-03-27 21:41:58 keypool added key 54, size=54
2018-03-27 21:41:58 keypool added key 55, size=55
2018-03-27 21:41:58 keypool added key 56, size=56
2018-03-27 21:41:58 keypool added key 57, size=57
2018-03-27 21:41:58 keypool added key 58, size=58
2018-03-27 21:41:58 keypool added key 59, size=59
2018-03-27 21:41:58 keypool added key 60, size=60
2018-03-27 21:41:58 keypool added key 61, size=61
2018-03-27 21:41:58 keypool added key 62, size=62
2018-03-27 21:41:58 keypool added key 63, size=63
2018-03-27 21:41:58 keypool added key 64, size=64
2018-03-27 21:41:58 keypool added key 65, size=65
2018-03-27 21:41:58 keypool added key 66, size=66
2018-03-27 21:41:58 keypool added key 67, size=67
2018-03-27 21:41:58 keypool added key 68, size=68
2018-03-27 21:41:58 keypool added key 69, size=69
2018-03-27 21:41:58 keypool added key 70, size=70
2018-03-27 21:41:58 keypool added key 71, size=71
2018-03-27 21:41:58 keypool added key 72, size=72
2018-03-27 21:41:58 keypool added key 73, size=73
2018-03-27 21:41:58 keypool added key 74, size=74
2018-03-27 21:41:58 keypool added key 75, size=75
2018-03-27 21:41:58 keypool added key 76, size=76
2018-03-27 21:41:58 keypool added key 77, size=77
2018-03-27 21:41:58 keypool added key 78, size=78
2018-03-27 21:41:58 keypool added key 79, size=79
2018-03-27 21:41:58 keypool added key 80, size=80
2018-03-27 21:41:58 keypool added key 81, size=81
2018-03-27 21:41:58 keypool added key 82, size=82
2018-03-27 21:41:58 keypool added key 83, size=83
2018-03-27 21:41:58 keypool added key 84, size=84
2018-03-27 21:41:58 keypool added key 85, size=85
2018-03-27 21:41:58 keypool added key 86, size=86
2018-03-27 21:41:58 keypool added key 87, size=87
2018-03-27 21:41:58 keypool added key 88, size=88
2018-03-27 21:41:58 keypool added key 89, size=89
2018-03-27 21:41:58 keypool added key 90, size=90
2018-03-27 21:41:58 keypool added key 91, size=91
2018-03-27 21:41:58 keypool added key 92, size=92
2018-03-27 21:41:58 keypool added key 93, size=93
2018-03-27 21:41:58 keypool added key 94, size=94
2018-03-27 21:41:58 keypool added key 95, size=95
2018-03-27 21:41:58 keypool added key 96, size=96
2018-03-27 21:41:58 keypool added key 97, size=97
2018-03-27 21:41:58 keypool added key 98, size=98
2018-03-27 21:41:58 keypool added key 99, size=99
2018-03-27 21:41:58 keypool added key 100, size=100
2018-03-27 21:41:58 keypool added key 101, size=101
2018-03-27 21:41:58 keypool reserve 1
2018-03-27 21:41:58 keypool keep 1
2018-03-27 21:41:58  wallet                  453ms
2018-03-27 21:41:58 setKeyPool.size() = 100
2018-03-27 21:41:58 mapWallet.size() = 0
2018-03-27 21:41:58 mapAddressBook.size() = 1
2018-03-27 21:41:58 UpdateTip: new best=00000ac5927c594d49cc0bdb81759d0da8297eb614683d3acb62f0703b639023 height=0 version=0x00000070 log2_work=20.000001 tx=1 date='2014-03-20 19:13:49' progress=0.000007 cache=0.0MiB(0tx)
2018-03-27 21:41:58 mapBlockIndex.size() = 1
2018-03-27 21:41:58 Failed to open mempool file from disk. Continuing anyway.
2018-03-27 21:41:58 nBestHeight = 0
2018-03-27 21:41:58 torcontrol thread start
2018-03-27 21:41:58 init message: Loading addresses...
2018-03-27 21:41:58 ERROR: Read: Failed to open file /home/ubuntu/.groestlcoin/peers.dat
2018-03-27 21:41:58 Invalid or missing peers.dat; recreating
2018-03-27 21:41:58 init message: Loading banlist...
2018-03-27 21:41:58 ERROR: Read: Failed to open file /home/ubuntu/.groestlcoin/banlist.dat
2018-03-27 21:41:58 Invalid or missing banlist.dat; recreating
2018-03-27 21:41:58 init message: Starting network threads...
2018-03-27 21:41:58 net thread start
2018-03-27 21:41:58 init message: Done loading
2018-03-27 21:41:58 dnsseed thread start
2018-03-27 21:41:58 addcon thread start
2018-03-27 21:41:58 Loading addresses from DNS seeds (could take a while)
2018-03-27 21:41:58 opencon thread start
2018-03-27 21:41:58 msghand thread start
2018-03-27 21:41:58 5 addresses found from DNS seeds
2018-03-27 21:41:58 dnsseed thread exit
2018-03-27 21:41:58 receive version message: /Groestlcoin:2.13.3/: version 70015, blocks=2020505, us=18.220.186.120:43158, peer=0
2018-03-27 21:41:59 Pre-allocating up to position 0x100000 in rev00000.dat
2018-03-27 21:41:59 UpdateTip: new best=00000973d52019a3fdda1b1f346e1d76cbf12f8fdd9fbf0ade33bc1da89cb2e9 height=1 version=0x00000070 log2_work=21.000001 tx=2 date='2014-03-22 13:41:11' progress=0.000014 cache=0.0MiB(1tx)
2018-03-27 21:41:59 UpdateTip: new best=000005a19e5880b2e85af1ece6a7a853dd786081915c9e5744da7d9d49e036b2 height=2 version=0x00000070 log2_work=21.584964 tx=3 date='2014-03-22 13:41:12' progress=0.000020 cache=0.0MiB(2tx)
2018-03-27 21:41:59 UpdateTip: new best=00000b7b176cc31f551ff383a57c1ef468b63d2b29ca0819d6728e74892868d5 height=3 version=0x00000070 log2_work=22.000001 tx=4 date='2014-03-22 13:41:14' progress=0.000027 cache=0.0MiB(3tx)

Last couple of lines shows that the synchronization process is running…

With “groestlcoin-cli” we can check the process of synchronization:

srv@local:~/groestlcoin-core/bin$ ./groestlcoin-cli getblockchaininfo
{
  "chain": "main",
  "blocks": 1592616,
  "headers": 2020535,
  "bestblockhash": "0000000002e22d910805ded76c2ecf8538b71bde259a87d42eb0f461874ac470",
  "difficulty": 29.7853045557759,
  "mediantime": 1495007637,
  "verificationprogress": 0.9850607167871146,
  "chainwork": "0000000000000000000000000000000000000000000000000238bd35306e983c",
  "pruned": false,
  "softforks": [
    {
      "id": "bip34",
      "version": 2,
      "reject": {
        "status": true
      }
    }, 
    {
      "id": "bip66",
      "version": 3,
      "reject": {
        "status": true
      }
    }
  ],
  "bip9_softforks": {
    "csv": {
      "status": "active",
      "startTime": 1484956800,
      "timeout": 1498003200,
      "since": 1439424
    },
    "segwit": {
      "status": "active",
      "startTime": 1484956800,
      "timeout": 1498003200,
      "since": 1439424
    },
    "bip65": {
      "status": "active",
      "startTime": 1484956800,
      "timeout": 1498003200,
      "since": 1439424
    }
  }
}

You can see we are at 1592616 of total 2020535. When “blocks” count equalize with the “headers” your Groestlcoin (wallet) node is synchronized successfully and the debug.log will just only output a couple of lines every minutes:

2018-03-27 22:25:49 UpdateTip: new best=000000000002c7e048092df98fd1d15f0e16e444f1c98f8777b826640e614e32 height=2020547 version=0x20000000 log2_work=60.941936 tx=2701441 date='2018-03-27 22:25:22' progress=1.000000 cache=94.0MiB(426839tx)
2018-03-27 22:25:56 UpdateTip: new best=0000000000063fc891f7a82e86ed43c30fd31c749955d7f0389b89a968fde322 height=2020548 version=0x20000000 log2_work=60.941946 tx=2701442 date='2018-03-27 22:25:49' progress=1.000000 cache=94.0MiB(426840tx)

The starting date of the line will differ with couple of seconds of the date in the transaction – the “date=” after the “tx=”.
Now you can start using your Groestlcoin (wallet) node for transactions and

At present with SSD and 16G RAM on a intel i7 processor and a fast Internet connection 100Mbps the full synchronization took about 40 minutes and 2G of storage space.
You are ready to use “groestlcoin-cli” or the others program to manage your funds – for example send, receive, check balance of your funds.
If you stop and start the program it will start the synchronization from the point you stopped.

The program, which makes an Groestlcoin node in your computer, is called

groestlcoind

and is part of the official package named

Groestlcoin Core

It includes the full capabilities of Groestlcoin wallet and a private Groestlcoin node. Building it from the source you’ll have your private and secure Groestlcoin, which could be used to make secure transactions and receive funds in Groestlcoin network and a lot more! DO IT YOURSELF – the most secure way of generating a Groestlcoin wallet address, making transactions such as send and receive coins and storing your wallets.

STEP 1) Update your system and install dependencies

sudo apt-get -y update
sudo apt-get -y upgrade
sudo apt-get -y install build-essential libssl-dev libboost-all-dev libdb5.3 libdb5.3-dev libdb5.3++-dev libtool automake libevent-dev bsdmainutils git ntp make g++ gcc autoconf cpp ngrep iftop sysstat autotools-dev pkg-config libminiupnpc-dev libzmq3-dev

STEP 2) Get the “Groestlcoin Core” code and compile it

You could change to stable release (probably the last tag) if you like.

git clone https://github.com/groestlcoin/groestlcoin
cd groestlcoin
export CFLAGS="-march=native -O2 -msse3 -fomit-frame-pointer -pipe"
export CXXFLAGS="${CFLAGS}"
export CHOST="x86_64-pc-linux-gnu"
./autogen.sh
./configure --prefix=/home/ubuntu/groestlcoin-core
make -j 8
make install

The above example assumes your home directory is “/home/ubuntu/” (the username of ubuntu), replace “/home/ubuntu/” with the directory where you want to install or the simplest way is to check your home directory and use it – “/home/[user_home_directory]/groestlcoin-core”. When compiled and installed the applications from the “Groestlcoin Core” package will be installed in “/home/[user_home_directory]/groestlcoin-core” or in our case “/home/ubuntu/groestlcoin-core”

STEP 3) Check is everything is OK

ls command shows the additional programs in the package.

srv@local:~/groestlcoin-core$ cd /home/ubuntu/groestlcoin-core/bin/
srv@local:~/groestlcoin-core/bin$ ./groestlcoind --version
Groestlcoin Core Daemon version v2.13.3
Copyright (C) 2014-2017 The Groestlcoin Core developers
Copyright (C) 2009-2017 The Bitcoin Core developers

Please contribute if you find Groestlcoin Core useful. Visit
<https://groestlcoin.org> for further information about the software.
The source code is available from <https://github.com/Groestlcoin/groestlcoin>.

This is experimental software.
Distributed under the MIT software license, see the accompanying file COPYING
or <http://www.opensource.org/licenses/mit-license.php>.

This product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit <https://www.openssl.org/> and cryptographic software written
by Eric Young and UPnP software written by Thomas Bernard.

srv@local:~/groestlcoin-core/bin$ ls
groestlcoin-cli  groestlcoind  groestlcoin-tx

Most used programs are groestlcoind and groestlcoin-cli, which offers a command line management of a groestlcoin wallet addresses.

* Here is the help output of “groestlcoind” – the Groestlcoin node daemon:

buntu@ip-172-31-14-157:~/groestlcoin-core/bin$ ./groestlcoind --help
Groestlcoin Core Daemon version v2.13.3

Usage:
  groestlcoind [options]                     Start Groestlcoin Core Daemon

Options:

  -?
       Print this help message and exit

  -version
       Print version and exit

  -alertnotify=<cmd>
       Execute command when a relevant alert is received or we see a really
       long fork (%s in cmd is replaced by message)

  -blocknotify=<cmd>
       Execute command when the best block changes (%s in cmd is replaced by
       block hash)

  -checkblocks=<n>
       How many blocks to check at startup (default: 6, 0 = all)

  -checklevel=<n>
       How thorough the block verification of -checkblocks is (0-4, default: 3)

  -conf=<file>
       Specify configuration file (default: groestlcoin.conf)

  -daemon
       Run in the background as a daemon and accept commands

  -datadir=<dir>
       Specify data directory

  -dbcache=<n>
       Set database cache size in megabytes (4 to 16384, default: 300)

  -loadblock=<file>
       Imports blocks from external blk000??.dat file on startup

  -maxorphantx=<n>
       Keep at most <n> unconnectable transactions in memory (default: 100)

  -maxmempool=<n>
       Keep the transaction memory pool below <n> megabytes (default: 300)

  -mempoolexpiry=<n>
       Do not keep transactions in the mempool longer than <n> hours (default:
       72)

  -par=<n>
       Set the number of script verification threads (-4 to 16, 0 = auto, <0 =
       leave that many cores free, default: 0)

  -pid=<file>
       Specify pid file (default: groestlcoin.pid)

  -prune=<n>
       Reduce storage requirements by pruning (deleting) old blocks. This mode
       is incompatible with -txindex and -rescan. Warning: Reverting
       this setting requires re-downloading the entire blockchain.
       (default: 0 = disable pruning blocks, >550 = target size in MiB
       to use for block files)

  -reindex-chainstate
       Rebuild chain state from the currently indexed blocks

  -reindex
       Rebuild chain state and block index from the blk*.dat files on disk

  -sysperms
       Create new files with system default permissions, instead of umask 077
       (only effective with disabled wallet functionality)

  -txindex
       Maintain a full transaction index, used by the getrawtransaction rpc
       call (default: 0)

Connection options:

  -addnode=<ip>
       Add a node to connect to and attempt to keep the connection open

  -banscore=<n>
       Threshold for disconnecting misbehaving peers (default: 100)

  -bantime=<n>
       Number of seconds to keep misbehaving peers from reconnecting (default:
       86400)

  -bind=<addr>
       Bind to given address and always listen on it. Use [host]:port notation
       for IPv6

  -connect=<ip>
       Connect only to the specified node(s)

  -discover
       Discover own IP addresses (default: 1 when listening and no -externalip
       or -proxy)

  -dns
       Allow DNS lookups for -addnode, -seednode and -connect (default: 1)

  -dnsseed
       Query for peer addresses via DNS lookup, if low on addresses (default: 1
       unless -connect)

  -externalip=<ip>
       Specify your own public address

  -forcednsseed
       Always query for peer addresses via DNS lookup (default: 0)

  -listen
       Accept connections from outside (default: 1 if no -proxy or -connect)

  -listenonion
       Automatically create Tor hidden service (default: 1)

  -maxconnections=<n>
       Maintain at most <n> connections to peers (default: 125)

  -maxreceivebuffer=<n>
       Maximum per-connection receive buffer, <n>*1000 bytes (default: 5000)

  -maxsendbuffer=<n>
       Maximum per-connection send buffer, <n>*1000 bytes (default: 1000)

  -maxtimeadjustment
       Maximum allowed median peer time offset adjustment. Local perspective of
       time may be influenced by peers forward or backward by this
       amount. (default: 4200 seconds)

  -onion=<ip:port>
       Use separate SOCKS5 proxy to reach peers via Tor hidden services
       (default: -proxy)

  -onlynet=<net>
       Only connect to nodes in network <net> (ipv4, ipv6 or onion)

  -permitbaremultisig
       Relay non-P2SH multisig (default: 1)

  -peerbloomfilters
       Support filtering of blocks and transaction with bloom filters (default:
       1)

  -port=<port>
       Listen for connections on <port> (default: 1331 or testnet: 17777)

  -proxy=<ip:port>
       Connect through SOCKS5 proxy

  -proxyrandomize
       Randomize credentials for every proxy connection. This enables Tor
       stream isolation (default: 1)

  -rpcserialversion
       Sets the serialization of raw transaction or block hex returned in
       non-verbose mode, non-segwit(0) or segwit(1) (default: 1)

  -seednode=<ip>
       Connect to a node to retrieve peer addresses, and disconnect

  -timeout=<n>
       Specify connection timeout in milliseconds (minimum: 1, default: 5000)

  -torcontrol=<ip>:<port>
       Tor control port to use if onion listening enabled (default:
       127.0.0.1:9051)

  -torpassword=<pass>
       Tor control port password (default: empty)

  -upnp
       Use UPnP to map the listening port (default: 0)

  -whitebind=<addr>
       Bind to given address and whitelist peers connecting to it. Use
       [host]:port notation for IPv6

  -whitelist=<IP address or network>
       Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) or
       CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple
       times. Whitelisted peers cannot be DoS banned and their
       transactions are always relayed, even if they are already in the
       mempool, useful e.g. for a gateway

  -whitelistrelay
       Accept relayed transactions received from whitelisted peers even when
       not relaying transactions (default: 1)

  -whitelistforcerelay
       Force relay of transactions from whitelisted peers even if they violate
       local relay policy (default: 1)

  -maxuploadtarget=<n>
       Tries to keep outbound traffic under the given target (in MiB per 24h),
       0 = no limit (default: 0)

Wallet options:

  -disablewallet
       Do not load the wallet and disable wallet RPC calls

  -keypool=<n>
       Set key pool size to <n> (default: 100)

  -fallbackfee=<amt>
       A fee rate (in GRS/kB) that will be used when fee estimation has
       insufficient data (default: 0.0002)

  -mintxfee=<amt>
       Fees (in GRS/kB) smaller than this are considered zero fee for
       transaction creation (default: 0.00001)

  -paytxfee=<amt>
       Fee (in GRS/kB) to add to transactions you send (default: 0.0001)

  -rescan
       Rescan the block chain for missing wallet transactions on startup

  -salvagewallet
       Attempt to recover private keys from a corrupt wallet on startup

  -spendzeroconfchange
       Spend unconfirmed change when sending transactions (default: 1)

  -txconfirmtarget=<n>
       If paytxfee is not set, include enough fee so transactions begin
       confirmation on average within n blocks (default: 6)

  -usehd
       Use hierarchical deterministic key generation (HD) after BIP32. Only has
       effect during wallet creation/first start (default: 1)

  -upgradewallet
       Upgrade wallet to latest format on startup

  -wallet=<file>
       Specify wallet file (within data directory) (default: wallet.dat)

  -walletbroadcast
       Make the wallet broadcast transactions (default: 1)

  -walletnotify=<cmd>
       Execute command when a wallet transaction changes (%s in cmd is replaced
       by TxID)

  -zapwallettxes=<mode>
       Delete all wallet transactions and only recover those parts of the
       blockchain through -rescan on startup (1 = keep tx meta data e.g.
       account owner and payment request information, 2 = drop tx meta
       data)

ZeroMQ notification options:

  -zmqpubhashblock=<address>
       Enable publish hash block in <address>

  -zmqpubhashtx=<address>
       Enable publish hash transaction in <address>

  -zmqpubrawblock=<address>
       Enable publish raw block in <address>

  -zmqpubrawtx=<address>
       Enable publish raw transaction in <address>

Debugging/Testing options:

  -uacomment=<cmt>
       Append comment to the user agent string

  -debug=<category>
       Output debugging information (default: 0, supplying <category> is
       optional). If <category> is not supplied or if <category> = 1,
       output all debugging information.<category> can be: addrman,
       alert, bench, cmpctblock, coindb, db, http, libevent, lock,
       mempool, mempoolrej, net, proxy, prune, rand, reindex, rpc,
       selectcoins, tor, zmq.

  -help-debug
       Show all debugging options (usage: --help -help-debug)

  -logips
       Include IP addresses in debug output (default: 0)

  -logtimestamps
       Prepend debug output with timestamp (default: 1)

  -minrelaytxfee=<amt>
       Fees (in GRS/kB) smaller than this are considered zero fee for relaying,
       mining and transaction creation (default: 0.0001)

  -maxtxfee=<amt>
       Maximum total fees (in GRS) to use in a single wallet transaction or raw
       transaction; setting this too low may abort large transactions
       (default: 0.10)

  -printtoconsole
       Send trace/debug info to console instead of debug.log file

  -shrinkdebugfile
       Shrink debug.log file on client startup (default: 1 when no -debug)

Chain selection options:

  -testnet
       Use the test chain

Node relay options:

  -bytespersigop
       Equivalent bytes per sigop in transactions for relay and mining
       (default: 20)

  -datacarrier
       Relay and mine data carrier transactions (default: 1)

  -datacarriersize
       Maximum size of data in data carrier transactions we relay and mine
       (default: 83)

  -mempoolreplacement
       Enable transaction replacement in the memory pool (default: 1)

Block creation options:

  -blockmaxweight=<n>
       Set maximum BIP141 block weight (default: 3000000)

  -blockmaxsize=<n>
       Set maximum block size in bytes (default: 750000)

  -blockprioritysize=<n>
       Set maximum size of high-priority/low-fee transactions in bytes
       (default: 0)

RPC server options:

  -server
       Accept command line and JSON-RPC commands

  -rest
       Accept public REST requests (default: 0)

  -rpcbind=<addr>
       Bind to given address to listen for JSON-RPC connections. Use
       [host]:port notation for IPv6. This option can be specified
       multiple times (default: bind to all interfaces)

  -rpccookiefile=<loc>
       Location of the auth cookie (default: data dir)

  -rpcuser=<user>
       Username for JSON-RPC connections

  -rpcpassword=<pw>
       Password for JSON-RPC connections

  -rpcauth=<userpw>
       Username and hashed password for JSON-RPC connections. The field
       <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A
       canonical python script is included in share/rpcuser. This option
       can be specified multiple times

  -rpcport=<port>
       Listen for JSON-RPC connections on <port> (default: 1441 or testnet:
       17766)

  -rpcallowip=<ip>
       Allow JSON-RPC connections from specified source. Valid for <ip> are a
       single IP (e.g. 1.2.3.4), a network/netmask (e.g.
       1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This
       option can be specified multiple times

  -rpcthreads=<n>
       Set the number of threads to service RPC calls (default: 4)

* Here is the help output of “groestlcoin-cli” – the cli management tool for Groestlcoin wallet address

ubuntu@ip-172-31-14-157:~/groestlcoin-core/bin$ ./groestlcoin-cli --help
Groestlcoin Core RPC client version v2.13.3

Usage:
  groestlcoin-cli [options] <command> [params]  Send command to Groestlcoin Core
  groestlcoin-cli [options] help                List commands
  groestlcoin-cli [options] help <command>      Get help for a command

Options:

  -?
       This help message

  -conf=<file>
       Specify configuration file (default: groestlcoin.conf)

  -datadir=<dir>
       Specify data directory

Chain selection options:

  -testnet
       Use the test chain

  -regtest
       Enter regression test mode, which uses a special chain in which blocks
       can be solved instantly. This is intended for regression testing
       tools and app development.

  -rpcconnect=<ip>
       Send commands to node running on <ip> (default: 127.0.0.1)

  -rpcport=<port>
       Connect to JSON-RPC on <port> (default: 1441 or testnet: 17766)

  -rpcwait
       Wait for RPC server to start

  -rpcuser=<user>
       Username for JSON-RPC connections

  -rpcpassword=<pw>
       Password for JSON-RPC connections

  -rpcclienttimeout=<n>
       Timeout during HTTP requests (default: 900)

  -stdin
       Read extra arguments from standard input, one per line until EOF/Ctrl-D
       (recommended for sensitive information such as passphrases)

* Here is the commands “groestlcoin-cli” supports – the cli management tool for Groestlcoin wallet address

./groestlcoin-cli help
== Blockchain ==
getbestblockhash
getblock "hash" ( verbose )
getblockchaininfo
getblockcount
getblockhash index
getblockheader "hash" ( verbose )
getchaintips
getdifficulty
getmempoolancestors txid (verbose)
getmempooldescendants txid (verbose)
getmempoolentry txid
getmempoolinfo
getrawmempool ( verbose )
gettxout "txid" n ( includemempool )
gettxoutproof ["txid",...] ( blockhash )
gettxoutsetinfo
preciousblock "hash"
verifychain ( checklevel numblocks )
verifytxoutproof "proof"

== Control ==
getinfo
getmemoryinfo
help ( "command" )
stop

== Generating ==
generate numblocks ( maxtries )
generatetoaddress numblocks address (maxtries)

== Mining ==
getblocktemplate ( TemplateRequest )
getmininginfo
getnetworkhashps ( blocks height )
prioritisetransaction <txid> <priority delta> <fee delta>
submitblock "hexdata" ( "jsonparametersobject" )

== Network ==
addnode "node" "add|remove|onetry"
clearbanned
disconnectnode "node" 
getaddednodeinfo ( "node" )
getconnectioncount
getnettotals
getnetworkinfo
getpeerinfo
listbanned
ping
setban "ip(/netmask)" "add|remove" (bantime) (absolute)
setnetworkactive true|false

== Rawtransactions ==
createrawtransaction [{"txid":"id","vout":n},...] {"address":amount,"data":"hex",...} ( locktime )
decoderawtransaction "hexstring"
decodescript "hex"
fundrawtransaction "hexstring" ( options )
getrawtransaction "txid" ( verbose )
sendrawtransaction "hexstring" ( allowhighfees )
signrawtransaction "hexstring" ( [{"txid":"id","vout":n,"scriptPubKey":"hex","redeemScript":"hex"},...] ["privatekey1",...] sighashtype )

== Util ==
createmultisig nrequired ["key",...]
estimatefee nblocks
estimatepriority nblocks
estimatesmartfee nblocks
estimatesmartpriority nblocks
signmessagewithprivkey "privkey" "message"
validateaddress "groestlcoinaddress"
verifymessage "groestlcoinaddress" "signature" "message"

== Wallet ==
abandontransaction "txid"
addmultisigaddress nrequired ["key",...] ( "account" )
addwitnessaddress "address"
backupwallet "destination"
dumpprivkey "groestlcoinaddress"
dumpwallet "filename"
encryptwallet "passphrase"
getaccount "groestlcoinaddress"
getaccountaddress "account"
getaddressesbyaccount "account"
getbalance ( "account" minconf includeWatchonly )
getnewaddress ( "account" )
getrawchangeaddress
getreceivedbyaccount "account" ( minconf )
getreceivedbyaddress "groestlcoinaddress" ( minconf )
gettransaction "txid" ( includeWatchonly )
getunconfirmedbalance
getwalletinfo
importaddress "address" ( "label" rescan p2sh )
importmulti '[<json import requests>]' '<json options>' 
importprivkey "groestlcoinprivkey" ( "label" rescan )
importprunedfunds
importpubkey "pubkey" ( "label" rescan )
importwallet "filename"
keypoolrefill ( newsize )
listaccounts ( minconf includeWatchonly)
listaddressgroupings
listlockunspent
listreceivedbyaccount ( minconf includeempty includeWatchonly)
listreceivedbyaddress ( minconf includeempty includeWatchonly)
listsinceblock ( "blockhash" target-confirmations includeWatchonly)
listtransactions ( "account" count from includeWatchonly)
listunspent ( minconf maxconf  ["address",...] )
lockunspent unlock ([{"txid":"txid","vout":n},...])
move "fromaccount" "toaccount" amount ( minconf "comment" )
removeprunedfunds "txid"
sendfrom "fromaccount" "togroestlcoinaddress" amount ( minconf "comment" "comment-to" )
sendmany "fromaccount" {"address":amount,...} ( minconf "comment" ["address",...] )
sendtoaddress "groestlcoinaddress" amount ( "comment" "comment-to" subtractfeefromamount )
setaccount "groestlcoinaddress" "account"
settxfee amount
signmessage "groestlcoinaddress" "message"

* Here is the output of the building process

srv@local:~$ sudo apt-get -y update
...
srv@local:~$ sudo apt-get -y upgrade
...
srv@local:~$ sudo apt-get -y install build-essential libssl-dev libboost-all-dev libdb5.3 libdb5.3-dev libdb5.3++-dev libtool automake libevent-dev bsdmainutils git ntp make g++ gcc autoconf cpp ngrep iftop sysstat autotools-dev pkg-config libminiupnpc-dev libzmq3-dev
Reading package lists... Done
Building dependency tree       
Reading state information... Done
bsdmainutils is already the newest version (9.0.6ubuntu3).
git is already the newest version (1:2.7.4-0ubuntu1.3).
libdb5.3 is already the newest version (5.3.28-11ubuntu0.1).
The following additional packages will be installed:
  binutils cpp-5 dpkg-dev fakeroot g++-5 gcc-5 icu-devtools libalgorithm-diff-perl libalgorithm-diff-xs-perl libalgorithm-merge-perl libasan2
  libatomic1 libboost-atomic-dev libboost-atomic1.58-dev libboost-atomic1.58.0 libboost-chrono-dev libboost-chrono1.58-dev libboost-chrono1.58.0
  libboost-context-dev libboost-context1.58-dev libboost-context1.58.0 libboost-coroutine-dev libboost-coroutine1.58-dev libboost-coroutine1.58.0
  libboost-date-time-dev libboost-date-time1.58-dev libboost-date-time1.58.0 libboost-dev libboost-exception-dev libboost-exception1.58-dev
  libboost-filesystem-dev libboost-filesystem1.58-dev libboost-filesystem1.58.0 libboost-graph-dev libboost-graph-parallel-dev
  libboost-graph-parallel1.58-dev libboost-graph-parallel1.58.0 libboost-graph1.58-dev libboost-graph1.58.0 libboost-iostreams-dev
  libboost-iostreams1.58-dev libboost-iostreams1.58.0 libboost-locale-dev libboost-locale1.58-dev libboost-locale1.58.0 libboost-log-dev
  libboost-log1.58-dev libboost-log1.58.0 libboost-math-dev libboost-math1.58-dev libboost-math1.58.0 libboost-mpi-dev libboost-mpi-python-dev
  libboost-mpi-python1.58-dev libboost-mpi-python1.58.0 libboost-mpi1.58-dev libboost-mpi1.58.0 libboost-program-options-dev
  libboost-program-options1.58-dev libboost-program-options1.58.0 libboost-python-dev libboost-python1.58-dev libboost-python1.58.0
  libboost-random-dev libboost-random1.58-dev libboost-random1.58.0 libboost-regex-dev libboost-regex1.58-dev libboost-regex1.58.0
  libboost-serialization-dev libboost-serialization1.58-dev libboost-serialization1.58.0 libboost-signals-dev libboost-signals1.58-dev
  libboost-signals1.58.0 libboost-system-dev libboost-system1.58-dev libboost-system1.58.0 libboost-test-dev libboost-test1.58-dev
  libboost-test1.58.0 libboost-thread-dev libboost-thread1.58-dev libboost-thread1.58.0 libboost-timer-dev libboost-timer1.58-dev
  libboost-timer1.58.0 libboost-tools-dev libboost-wave-dev libboost-wave1.58-dev libboost-wave1.58.0 libboost1.58-dev libboost1.58-tools-dev
  libc-dev-bin libc6-dev libcc1-0 libcilkrts5 libdb5.3++ libdpkg-perl libevent-core-2.0-5 libevent-extra-2.0-5 libevent-openssl-2.0-5
  libevent-pthreads-2.0-5 libexpat1-dev libfakeroot libfile-fcntllock-perl libgcc-5-dev libgomp1 libhwloc-dev libhwloc-plugins libhwloc5
  libibverbs-dev libibverbs1 libicu-dev libisl15 libitm1 liblsan0 libltdl-dev libltdl7 libminiupnpc10 libmpc3 libmpx0 libnet1 libnuma-dev
  libopenmpi-dev libopenmpi1.10 libopts25 libpciaccess0 libpython-dev libpython-stdlib libpython2.7 libpython2.7-dev libpython2.7-minimal
  libpython2.7-stdlib libquadmath0 libsensors4 libsodium18 libssl-doc libstdc++-5-dev libtsan0 libubsan0 libzmq5 linux-libc-dev m4 manpages-dev
  mpi-default-bin mpi-default-dev ocl-icd-libopencl1 openmpi-bin openmpi-common python python-dev python-minimal python2.7 python2.7-dev
  python2.7-minimal zlib1g-dev
Suggested packages:
  autoconf-archive gnu-standards autoconf-doc gettext binutils-doc cpp-doc gcc-5-locales debian-keyring g++-multilib g++-5-multilib gcc-5-doc
  libstdc++6-5-dbg gcc-multilib flex bison gdb gcc-doc gcc-5-multilib libgcc1-dbg libgomp1-dbg libitm1-dbg libatomic1-dbg libasan2-dbg liblsan0-dbg
  libtsan0-dbg libubsan0-dbg libcilkrts5-dbg libmpx0-dbg libquadmath0-dbg libboost-doc graphviz libboost1.58-doc gccxml libmpfrc++-dev libntl-dev
  xsltproc doxygen docbook-xml docbook-xsl default-jdk fop glibc-doc db5.3-doc libhwloc-contrib-plugins icu-doc libtool-doc minissdpd opennmpi-doc
  lm-sensors libstdc++-5-doc gfortran | fortran95-compiler gcj-jdk make-doc ntp-doc opencl-icd gfortran openmpi-checkpoint python-doc python-tk
  python2.7-doc binfmt-support isag
The following NEW packages will be installed:
  autoconf automake autotools-dev binutils build-essential cpp cpp-5 dpkg-dev fakeroot g++ g++-5 gcc gcc-5 icu-devtools iftop libalgorithm-diff-perl
  libalgorithm-diff-xs-perl libalgorithm-merge-perl libasan2 libatomic1 libboost-all-dev libboost-atomic-dev libboost-atomic1.58-dev
  libboost-atomic1.58.0 libboost-chrono-dev libboost-chrono1.58-dev libboost-chrono1.58.0 libboost-context-dev libboost-context1.58-dev
  libboost-context1.58.0 libboost-coroutine-dev libboost-coroutine1.58-dev libboost-coroutine1.58.0 libboost-date-time-dev
  libboost-date-time1.58-dev libboost-date-time1.58.0 libboost-dev libboost-exception-dev libboost-exception1.58-dev libboost-filesystem-dev
  libboost-filesystem1.58-dev libboost-filesystem1.58.0 libboost-graph-dev libboost-graph-parallel-dev libboost-graph-parallel1.58-dev
  libboost-graph-parallel1.58.0 libboost-graph1.58-dev libboost-graph1.58.0 libboost-iostreams-dev libboost-iostreams1.58-dev
  libboost-iostreams1.58.0 libboost-locale-dev libboost-locale1.58-dev libboost-locale1.58.0 libboost-log-dev libboost-log1.58-dev
  libboost-log1.58.0 libboost-math-dev libboost-math1.58-dev libboost-math1.58.0 libboost-mpi-dev libboost-mpi-python-dev
  libboost-mpi-python1.58-dev libboost-mpi-python1.58.0 libboost-mpi1.58-dev libboost-mpi1.58.0 libboost-program-options-dev
  libboost-program-options1.58-dev libboost-program-options1.58.0 libboost-python-dev libboost-python1.58-dev libboost-python1.58.0
  libboost-random-dev libboost-random1.58-dev libboost-random1.58.0 libboost-regex-dev libboost-regex1.58-dev libboost-regex1.58.0
  libboost-serialization-dev libboost-serialization1.58-dev libboost-serialization1.58.0 libboost-signals-dev libboost-signals1.58-dev
  libboost-signals1.58.0 libboost-system-dev libboost-system1.58-dev libboost-system1.58.0 libboost-test-dev libboost-test1.58-dev
  libboost-test1.58.0 libboost-thread-dev libboost-thread1.58-dev libboost-thread1.58.0 libboost-timer-dev libboost-timer1.58-dev
  libboost-timer1.58.0 libboost-tools-dev libboost-wave-dev libboost-wave1.58-dev libboost-wave1.58.0 libboost1.58-dev libboost1.58-tools-dev
  libc-dev-bin libc6-dev libcc1-0 libcilkrts5 libdb5.3++ libdb5.3++-dev libdb5.3-dev libdpkg-perl libevent-core-2.0-5 libevent-dev
  libevent-extra-2.0-5 libevent-openssl-2.0-5 libevent-pthreads-2.0-5 libexpat1-dev libfakeroot libfile-fcntllock-perl libgcc-5-dev libgomp1
  libhwloc-dev libhwloc-plugins libhwloc5 libibverbs-dev libibverbs1 libicu-dev libisl15 libitm1 liblsan0 libltdl-dev libltdl7 libminiupnpc-dev
  libminiupnpc10 libmpc3 libmpx0 libnet1 libnuma-dev libopenmpi-dev libopenmpi1.10 libopts25 libpciaccess0 libpython-dev libpython-stdlib
  libpython2.7 libpython2.7-dev libpython2.7-minimal libpython2.7-stdlib libquadmath0 libsensors4 libsodium18 libssl-dev libssl-doc libstdc++-5-dev
  libtool libtsan0 libubsan0 libzmq3-dev libzmq5 linux-libc-dev m4 make manpages-dev mpi-default-bin mpi-default-dev ngrep ntp ocl-icd-libopencl1
  openmpi-bin openmpi-common pkg-config python python-dev python-minimal python2.7 python2.7-dev python2.7-minimal sysstat zlib1g-dev
0 upgraded, 178 newly installed, 0 to remove and 3 not upgraded.
Need to get 105 MB of archives.
After this operation, 470 MB of additional disk space will be used.
......
......
......
srv@local:~$ git clone https://github.com/groestlcoin/groestlcoin
Cloning into 'groestlcoin'...
remote: Counting objects: 99702, done.
remote: Total 99702 (delta 0), reused 0 (delta 0), pack-reused 99701
Receiving objects: 100% (99702/99702), 89.71 MiB | 41.15 MiB/s, done.
Resolving deltas: 100% (69017/69017), done.
Checking connectivity... done.
srv@local:~$ cd groestlcoin
srv@local:~/groestlcoin$ ./autogen.sh
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'.
libtoolize: copying file 'build-aux/ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'build-aux/m4'.
libtoolize: copying file 'build-aux/m4/libtool.m4'
libtoolize: copying file 'build-aux/m4/ltoptions.m4'
libtoolize: copying file 'build-aux/m4/ltsugar.m4'
libtoolize: copying file 'build-aux/m4/ltversion.m4'
libtoolize: copying file 'build-aux/m4/lt~obsolete.m4'
configure.ac:45: installing 'build-aux/compile'
configure.ac:45: installing 'build-aux/config.guess'
configure.ac:45: installing 'build-aux/config.sub'
configure.ac:28: installing 'build-aux/install-sh'
configure.ac:28: installing 'build-aux/missing'
Makefile.am: installing 'build-aux/depcomp'
parallel-tests: installing 'build-aux/test-driver'
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'.
libtoolize: copying file 'build-aux/ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'build-aux/m4'.
libtoolize: copying file 'build-aux/m4/libtool.m4'
libtoolize: copying file 'build-aux/m4/ltoptions.m4'
libtoolize: copying file 'build-aux/m4/ltsugar.m4'
libtoolize: copying file 'build-aux/m4/ltversion.m4'
libtoolize: copying file 'build-aux/m4/lt~obsolete.m4'
configure.ac:10: installing 'build-aux/compile'
configure.ac:5: installing 'build-aux/config.guess'
configure.ac:5: installing 'build-aux/config.sub'
configure.ac:9: installing 'build-aux/install-sh'
configure.ac:9: installing 'build-aux/missing'
Makefile.am: installing 'build-aux/depcomp'
parallel-tests: installing 'build-aux/test-driver'
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'.
libtoolize: copying file 'build-aux/ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'build-aux/m4'.
libtoolize: copying file 'build-aux/m4/libtool.m4'
libtoolize: copying file 'build-aux/m4/ltoptions.m4'
libtoolize: copying file 'build-aux/m4/ltsugar.m4'
libtoolize: copying file 'build-aux/m4/ltversion.m4'
libtoolize: copying file 'build-aux/m4/lt~obsolete.m4'
configure.ac:72: installing 'build-aux/compile'
configure.ac:22: installing 'build-aux/config.guess'
configure.ac:22: installing 'build-aux/config.sub'
configure.ac:32: installing 'build-aux/install-sh'
configure.ac:32: installing 'build-aux/missing'
Makefile.am:12: warning: user variable 'GZIP_ENV' defined here ...
/usr/share/automake-1.15/am/distdir.am: ... overrides Automake variable 'GZIP_ENV' defined here
src/Makefile.am: installing 'build-aux/depcomp'
src/Makefile.am:479: warning: user target '.mm.o' defined here ...
/usr/share/automake-1.15/am/depend2.am: ... overrides Automake target '.mm.o' defined here
parallel-tests: installing 'build-aux/test-driver'
srv@local:~/groestlcoin$ export CFLAGS="-march=native -O2 -msse3 -fomit-frame-pointer -pipe"
srv@local:~/groestlcoin$ export CXXFLAGS="${CFLAGS}"
srv@local:~/groestlcoin$ export CHOST="x86_64-pc-linux-gnu"
srv@local:~/groestlcoin$ ./configure --prefix=~/groestlcoin-core
srv@local:~/groestlcoin$ ./configure --prefix=/home/ubuntu/groestlcoin-core
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
checking whether make supports nested variables... (cached) yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking whether g++ supports C++11 features by default... no
checking whether g++ supports C++11 features with -std=c++11... yes
checking whether std::atomic can be used without link library... yes
checking whether we are using the GNU Objective C++ compiler... no
checking whether g++ -std=c++11 accepts -g... no
checking dependency style of g++ -std=c++11... gcc3
checking how to print strings... printf
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -std=c++11 -E
checking for ld used by g++ -std=c++11... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ -std=c++11 linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ -std=c++11 option to produce PIC... -fPIC -DPIC
checking if g++ -std=c++11 PIC flag -fPIC -DPIC works... yes
checking if g++ -std=c++11 static flag -static works... yes
checking if g++ -std=c++11 supports -c -o file.o... yes
checking if g++ -std=c++11 supports -c -o file.o... (cached) yes
checking whether the g++ -std=c++11 linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for ar... /usr/bin/ar
checking for ranlib... /usr/bin/ranlib
checking for strip... /usr/bin/strip
checking for gcov... /usr/bin/gcov
checking for lcov... no
checking for python3.6... no
checking for python3.5... /usr/bin/python3.5
checking for genhtml... no
checking for git... /usr/bin/git
checking for ccache... no
checking for xgettext... no
checking for hexdump... /usr/bin/hexdump
checking for readelf... /usr/bin/readelf
checking for c++filt... /usr/bin/c++filt
checking for objcopy... /usr/bin/objcopy
checking whether C++ compiler accepts -Werror... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking whether byte ordering is bigendian... no
checking whether gcc is Clang... no
checking whether pthreads work with -pthread... yes
checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE
checking whether more special flags are required for pthreads... no
checking for PTHREAD_PRIO_INHERIT... yes
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking whether strerror_r is declared... yes
checking for strerror_r... yes
checking whether strerror_r returns char *... yes
checking whether the linker accepts -Wl,--large-address-aware... no
checking for __attribute__((visibility))... yes
checking for __attribute__((dllexport))... no
checking for __attribute__((dllimport))... no
checking for library containing clock_gettime... none required
checking whether C++ compiler accepts -fPIC... yes
checking whether C++ compiler accepts -Wstack-protector... yes
checking whether C++ compiler accepts -fstack-protector-all... yes
checking whether C++ preprocessor accepts -D_FORTIFY_SOURCE=2... yes
checking whether C++ preprocessor accepts -U_FORTIFY_SOURCE... yes
checking whether the linker accepts -Wl,--dynamicbase... no
checking whether the linker accepts -Wl,--nxcompat... no
checking whether the linker accepts -Wl,--high-entropy-va... no
checking whether the linker accepts -Wl,-z,relro... yes
checking whether the linker accepts -Wl,-z,now... yes
checking whether C++ compiler accepts -fPIE... yes
checking whether the linker accepts -pie... yes
checking endian.h usability... yes
checking endian.h presence... yes
checking for endian.h... yes
checking sys/endian.h usability... no
checking sys/endian.h presence... no
checking for sys/endian.h... no
checking byteswap.h usability... yes
checking byteswap.h presence... yes
checking for byteswap.h... yes
checking stdio.h usability... yes
checking stdio.h presence... yes
checking for stdio.h... yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for strings.h... (cached) yes
checking for sys/types.h... (cached) yes
checking for sys/stat.h... (cached) yes
checking sys/select.h usability... yes
checking sys/select.h presence... yes
checking for sys/select.h... yes
checking sys/prctl.h usability... yes
checking sys/prctl.h presence... yes
checking for sys/prctl.h... yes
checking whether strnlen is declared... yes
checking whether daemon is declared... yes
checking whether le16toh is declared... yes
checking whether le32toh is declared... yes
checking whether le64toh is declared... yes
checking whether htole16 is declared... yes
checking whether htole32 is declared... yes
checking whether htole64 is declared... yes
checking whether be16toh is declared... yes
checking whether be32toh is declared... yes
checking whether be64toh is declared... yes
checking whether htobe16 is declared... yes
checking whether htobe32 is declared... yes
checking whether htobe64 is declared... yes
checking whether bswap_16 is declared... yes
checking whether bswap_32 is declared... yes
checking whether bswap_64 is declared... yes
checking for MSG_NOSIGNAL... yes
checking for visibility attribute... yes
checking for Berkeley DB C++ headers... default
configure: WARNING: Found Berkeley DB other than 4.8; wallets opened by this build will not be portable!
checking for main in -ldb_cxx-4.8... no
checking for main in -ldb_cxx... yes
checking miniupnpc/miniwget.h usability... yes
checking miniupnpc/miniwget.h presence... yes
checking for miniupnpc/miniwget.h... yes
checking for main in -lminiupnpc... yes
checking miniupnpc/miniupnpc.h usability... yes
checking miniupnpc/miniupnpc.h presence... yes
checking for miniupnpc/miniupnpc.h... yes
checking for main in -lminiupnpc... (cached) yes
checking miniupnpc/upnpcommands.h usability... yes
checking miniupnpc/upnpcommands.h presence... yes
checking for miniupnpc/upnpcommands.h... yes
checking for main in -lminiupnpc... (cached) yes
checking miniupnpc/upnperrors.h usability... yes
checking miniupnpc/upnperrors.h presence... yes
checking for miniupnpc/upnperrors.h... yes
checking for main in -lminiupnpc... (cached) yes
checking for QT... no
checking for QT... no
configure: WARNING: Qt dependencies not found; groestlcoin-qt frontend will not be built
checking whether to build Groestlcoin Core GUI... no (Qt5)
checking for boostlib >= 1.47.0... yes
checking whether the Boost::System library is available... yes
checking for exit in -lboost_system... yes
checking whether the Boost::Filesystem library is available... yes
checking for exit in -lboost_filesystem... yes
checking whether the Boost::Program_Options library is available... yes
checking for exit in -lboost_program_options... yes
checking whether the Boost::Thread library is available... yes
checking for exit in -lboost_thread... yes
checking whether the Boost::Chrono library is available... yes
checking for exit in -lboost_chrono... yes
checking for mismatched boost c++11 scoped enums... ok
checking for SSL... yes
checking for CRYPTO... yes
checking for EVENT... yes
checking for EVENT_PTHREADS... yes
checking for ZMQ... yes
checking whether EVP_MD_CTX_new is declared... no
checking whether to build groestlcoind... yes
checking whether to build utils (groestlcoin-cli groestlcoin-tx)... yes
checking whether to build libraries... yes
checking if ccache should be used... no
checking if wallet should be enabled... yes
checking whether to build with support for UPnP... yes
checking whether to build with UPnP enabled by default... no
checking whether to build test_groestlcoin... no
checking whether to reduce exports... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating libgroestlcoinconsensus.pc
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating doc/man/Makefile
config.status: creating share/setup.nsi
config.status: creating share/qt/Info.plist
config.status: creating src/test/buildenv.py
config.status: creating qa/pull-tester/tests_config.py
config.status: creating contrib/devtools/split-debug.sh
config.status: creating src/config/bitcoin-config.h
config.status: src/config/bitcoin-config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
=== configuring in src/univalue (/home/ubuntu/groestlcoin/src/univalue)
configure: running /bin/bash ./configure --disable-option-checking '--prefix=/home/ubuntu/groestlcoin-core'  'CXXFLAGS=-march=native -O2 -msse3 -fomit-frame-pointer -pipe' 'CFLAGS=-march=native -O2 -msse3 -fomit-frame-pointer -pipe' '--disable-shared' '--with-pic' '--with-bignum=no' '--enable-module-recovery' --cache-file=/dev/null --srcdir=.
checking whether make supports nested variables... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating pc/libunivalue.pc
config.status: creating pc/libunivalue-uninstalled.pc
config.status: creating univalue-config.h
config.status: univalue-config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
=== configuring in src/secp256k1 (/home/ubuntu/groestlcoin/src/secp256k1)
configure: running /bin/bash ./configure --disable-option-checking '--prefix=/home/ubuntu/groestlcoin-core'  'CXXFLAGS=-march=native -O2 -msse3 -fomit-frame-pointer -pipe' 'CFLAGS=-march=native -O2 -msse3 -fomit-frame-pointer -pipe' '--disable-shared' '--with-pic' '--with-bignum=no' '--enable-module-recovery' --cache-file=/dev/null --srcdir=.
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking how to print strings... printf
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking whether make supports nested variables... (cached) yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for ar... /usr/bin/ar
checking for ranlib... /usr/bin/ranlib
checking for strip... /usr/bin/strip
checking for gcc... gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking dependency style of gcc... (cached) gcc3
checking how to run the C preprocessor... gcc -E
checking for gcc option to accept ISO C89... (cached) none needed
checking dependency style of gcc... gcc3
checking if gcc supports -std=c89 -pedantic -Wall -Wextra -Wcast-align -Wnested-externs -Wshadow -Wstrict-prototypes -Wno-unused-function -Wno-long-long -Wno-overlength-strings... yes
checking if gcc supports -fvisibility=hidden... yes
checking for __int128... yes
checking for __builtin_expect... yes
checking native compiler: gcc... ok
checking for x86_64 assembly availability... yes
checking for CRYPTO... yes
checking for main in -lcrypto... yes
checking for EC functions in libcrypto... yes
checking for javac... no
configure: WARNING: cannot find JDK; try setting $JAVAC or $JAVA_HOME
checking jni headers... none
configure: WARNING: jni headers/dependencies not found. jni support disabled
checking whether byte ordering is bigendian... no
configure: Using static precomputation: yes
configure: Using assembly optimizations: x86_64
configure: Using field implementation: 64bit
configure: Using bignum implementation: no
configure: Using scalar implementation: 64bit
configure: Using endomorphism optimizations: no
configure: Building ECDH module: no
configure: Building ECDSA pubkey recovery module: yes
configure: Using jni: no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating libsecp256k1.pc
config.status: creating src/libsecp256k1-config.h
config.status: src/libsecp256k1-config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
Fixing libtool for -rpath problems.

Options used to compile and link:
  with wallet   = yes
  with gui / qt = no
  with zmq      = yes
  with test     = no
  with bench    = no
  with upnp     = yes
  debug enabled = no

  target os     = linux
  build os      = 

  CC            = gcc
  CFLAGS        = -march=native -O2 -msse3 -fomit-frame-pointer -pipe
  CPPFLAGS      =  -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS
  CXX           = g++ -std=c++11
  CXXFLAGS      = -march=native -O2 -msse3 -fomit-frame-pointer -pipe
  LDFLAGS       = 

srv@local:~/groestlcoin$ make -j 8
Making all in src
make[1]: Entering directory '/home/ubuntu/groestlcoin/src'
make[2]: Entering directory '/home/ubuntu/groestlcoin/src'
  CXX      crypto/libgroestlcoinconsensus_la-aes.lo
  CXX      crypto/libgroestlcoinconsensus_la-hmac_sha256.lo
  CXX      crypto/libgroestlcoinconsensus_la-hmac_sha512.lo
  CXX      crypto/libgroestlcoinconsensus_la-sha1.lo
  CXX      crypto/libgroestlcoinconsensus_la-sha256.lo
  CXX      crypto/libgroestlcoinconsensus_la-sha512.lo
  CXX      crypto/libgroestlcoinconsensus_la-ripemd160.lo
  CXX      libgroestlcoinconsensus_la-arith_uint256.lo
  CXX      consensus/libgroestlcoinconsensus_la-merkle.lo
  CXX      libgroestlcoinconsensus_la-hash.lo
  CXX      sphlib/libgroestlcoinconsensus_la-groestl.lo
  CXX      libgroestlcoinconsensus_la-groestlcoin-hash.lo
  CXX      primitives/libgroestlcoinconsensus_la-block.lo
  CXX      primitives/libgroestlcoinconsensus_la-transaction.lo
  CXX      libgroestlcoinconsensus_la-pubkey.lo
  CXX      script/libgroestlcoinconsensus_la-groestlcoinconsensus.lo
  CXX      script/libgroestlcoinconsensus_la-interpreter.lo
  CXX      script/libgroestlcoinconsensus_la-script.lo
  CXX      script/libgroestlcoinconsensus_la-script_error.lo
  CXX      libgroestlcoinconsensus_la-uint256.lo
  CXX      libgroestlcoinconsensus_la-utilstrencodings.lo
make[3]: Entering directory '/home/ubuntu/groestlcoin/src/secp256k1'
gcc -I. -g -O2 -Wall -Wextra -Wno-unused-function -c src/gen_context.c -o gen_context.o
  CXX      groestlcoind-groestlcoind.o
  CXX      libgroestlcoin_server_a-addrman.o
  CXX      libgroestlcoin_server_a-addrdb.o
  CXX      libgroestlcoin_server_a-bloom.o
  CXX      libgroestlcoin_server_a-blockencodings.o
  CXX      libgroestlcoin_server_a-chain.o
gcc gen_context.o -o gen_context
./gen_context
  CC       src/libsecp256k1_la-secp256k1.lo
  CXX      libgroestlcoin_server_a-checkpoints.o
  CXX      libgroestlcoin_server_a-httprpc.o
  CCLD     libsecp256k1.la
/usr/bin/ar: `u' modifier ignored since `D' is the default (see `U')
make[3]: Leaving directory '/home/ubuntu/groestlcoin/src/secp256k1'
  CXX      libgroestlcoin_server_a-httpserver.o
  CXX      libgroestlcoin_server_a-init.o
  CXX      libgroestlcoin_server_a-dbwrapper.o
  CXX      libgroestlcoin_server_a-merkleblock.o
  CXX      libgroestlcoin_server_a-miner.o
  CXX      libgroestlcoin_server_a-net.o
  CXX      libgroestlcoin_server_a-net_processing.o
  CXX      libgroestlcoin_server_a-noui.o
  CXX      policy/libgroestlcoin_server_a-fees.o
  CXX      policy/libgroestlcoin_server_a-policy.o
  CXX      libgroestlcoin_server_a-pow.o
  CXX      libgroestlcoin_server_a-rest.o
  CXX      rpc/libgroestlcoin_server_a-blockchain.o
  CXX      rpc/libgroestlcoin_server_a-mining.o
  CXX      rpc/libgroestlcoin_server_a-misc.o
  CXX      rpc/libgroestlcoin_server_a-net.o
  CXX      rpc/libgroestlcoin_server_a-rawtransaction.o
  CXX      rpc/libgroestlcoin_server_a-server.o
  CXX      script/libgroestlcoin_server_a-sigcache.o
  CXX      script/libgroestlcoin_server_a-ismine.o
  CXX      libgroestlcoin_server_a-timedata.o
  CXX      libgroestlcoin_server_a-torcontrol.o
  CXX      libgroestlcoin_server_a-txdb.o
  CXX      libgroestlcoin_server_a-txmempool.o
  CXX      libgroestlcoin_server_a-ui_interface.o
  CXX      libgroestlcoin_server_a-validation.o
  CXX      libgroestlcoin_server_a-validationinterface.o
  CXX      libgroestlcoin_server_a-versionbits.o
  CXX      libgroestlcoin_common_a-amount.o
  CXX      libgroestlcoin_common_a-base58.o
  CXX      libgroestlcoin_common_a-groestlcoin.o
  CXX      libgroestlcoin_common_a-coins.o
  CXX      libgroestlcoin_common_a-compressor.o
  CXX      libgroestlcoin_common_a-core_read.o
  CXX      libgroestlcoin_common_a-core_write.o
  CXX      libgroestlcoin_common_a-key.o
  CXX      libgroestlcoin_common_a-keystore.o
  CXX      libgroestlcoin_common_a-netaddress.o
  CXX      libgroestlcoin_common_a-netbase.o
  CXX      libgroestlcoin_common_a-protocol.o
  CXX      libgroestlcoin_common_a-scheduler.o
  CXX      script/libgroestlcoin_common_a-sign.o
  CXX      script/libgroestlcoin_common_a-standard.o
  CXX      libgroestlcoin_common_a-warnings.o
make[3]: Entering directory '/home/ubuntu/groestlcoin/src/univalue'
  CXX      lib/libunivalue_la-univalue.lo
  CXX      lib/libunivalue_la-univalue_read.lo
  CXX      lib/libunivalue_la-univalue_write.lo
  CXX      support/libgroestlcoin_util_a-lockedpool.o
  CXX      libgroestlcoin_util_a-chainparamsbase.o
  CXXLD    libunivalue.la
ar: `u' modifier ignored since `D' is the default (see `U')
make[3]: Leaving directory '/home/ubuntu/groestlcoin/src/univalue'
  CXX      compat/libgroestlcoin_util_a-glibc_sanity.o
  CXX      compat/libgroestlcoin_util_a-glibcxx_sanity.o
  CXX      compat/libgroestlcoin_util_a-strnlen.o
  CXX      libgroestlcoin_util_a-random.o
  CXX      rpc/libgroestlcoin_util_a-protocol.o
  CXX      support/libgroestlcoin_util_a-cleanse.o
  CXX      libgroestlcoin_util_a-sync.o
  CXX      libgroestlcoin_util_a-threadinterrupt.o
  CXX      libgroestlcoin_util_a-util.o
  CXX      libgroestlcoin_util_a-utilmoneystr.o
^[[B  CXX      libgroestlcoin_util_a-utilstrencodings.o
  CXX      libgroestlcoin_util_a-utiltime.o
  CXX      wallet/libgroestlcoin_wallet_a-crypter.o
  CXX      wallet/libgroestlcoin_wallet_a-db.o
  CXX      wallet/libgroestlcoin_wallet_a-rpcdump.o
  CXX      wallet/libgroestlcoin_wallet_a-rpcwallet.o
  CXX      wallet/libgroestlcoin_wallet_a-wallet.o
  CXX      wallet/libgroestlcoin_wallet_a-walletdb.o
  CXX      policy/libgroestlcoin_wallet_a-rbf.o
  CXX      zmq/libgroestlcoin_zmq_a-zmqabstractnotifier.o
  CXX      zmq/libgroestlcoin_zmq_a-zmqnotificationinterface.o
  CXX      zmq/libgroestlcoin_zmq_a-zmqpublishnotifier.o
  CXX      libgroestlcoin_consensus_a-arith_uint256.o
  CXX      consensus/libgroestlcoin_consensus_a-merkle.o
  CXX      libgroestlcoin_consensus_a-hash.o
  CXX      sphlib/libgroestlcoin_consensus_a-groestl.o
  CXX      libgroestlcoin_consensus_a-groestlcoin-hash.o
  CXX      primitives/libgroestlcoin_consensus_a-block.o
  CXX      primitives/libgroestlcoin_consensus_a-transaction.o
  CXX      libgroestlcoin_consensus_a-pubkey.o
  CXX      script/libgroestlcoin_consensus_a-groestlcoinconsensus.o
  CXX      script/libgroestlcoin_consensus_a-interpreter.o
  CXX      script/libgroestlcoin_consensus_a-script.o
  CXX      script/libgroestlcoin_consensus_a-script_error.o
  CXX      libgroestlcoin_consensus_a-uint256.o
  CXX      libgroestlcoin_consensus_a-utilstrencodings.o
  CXX      crypto/crypto_libgroestlcoin_crypto_a-aes.o
  CXX      crypto/crypto_libgroestlcoin_crypto_a-hmac_sha256.o
  CXX      crypto/crypto_libgroestlcoin_crypto_a-hmac_sha512.o
  CXX      crypto/crypto_libgroestlcoin_crypto_a-ripemd160.o
  CXX      crypto/crypto_libgroestlcoin_crypto_a-sha1.o
  CXX      crypto/crypto_libgroestlcoin_crypto_a-sha256.o
  CXX      crypto/crypto_libgroestlcoin_crypto_a-sha512.o
  CXX      leveldb/db/leveldb_libleveldb_a-builder.o
  CXX      leveldb/db/leveldb_libleveldb_a-c.o
  CXX      leveldb/db/leveldb_libleveldb_a-dbformat.o
  CXX      leveldb/db/leveldb_libleveldb_a-db_impl.o
  CXX      leveldb/db/leveldb_libleveldb_a-db_iter.o
  CXX      leveldb/db/leveldb_libleveldb_a-dumpfile.o
  CXX      leveldb/db/leveldb_libleveldb_a-filename.o
  CXX      leveldb/db/leveldb_libleveldb_a-log_reader.o
  CXX      leveldb/db/leveldb_libleveldb_a-log_writer.o
  CXX      leveldb/db/leveldb_libleveldb_a-memtable.o
  CXX      leveldb/db/leveldb_libleveldb_a-repair.o
  CXX      leveldb/db/leveldb_libleveldb_a-table_cache.o
  CXX      leveldb/db/leveldb_libleveldb_a-version_edit.o
  CXX      leveldb/db/leveldb_libleveldb_a-version_set.o
  CXX      leveldb/db/leveldb_libleveldb_a-write_batch.o
  CXX      leveldb/table/leveldb_libleveldb_a-block_builder.o
  CXX      leveldb/table/leveldb_libleveldb_a-block.o
  CXX      leveldb/table/leveldb_libleveldb_a-filter_block.o
  CXX      leveldb/table/leveldb_libleveldb_a-format.o
  CXX      leveldb/table/leveldb_libleveldb_a-iterator.o
  CXX      leveldb/table/leveldb_libleveldb_a-merger.o
  CXX      leveldb/table/leveldb_libleveldb_a-table_builder.o
  CXX      leveldb/table/leveldb_libleveldb_a-table.o
  CXX      leveldb/table/leveldb_libleveldb_a-two_level_iterator.o
  CXX      leveldb/util/leveldb_libleveldb_a-arena.o
  CXX      leveldb/util/leveldb_libleveldb_a-bloom.o
  CXX      leveldb/util/leveldb_libleveldb_a-cache.o
  CXX      leveldb/util/leveldb_libleveldb_a-coding.o
  CXX      leveldb/util/leveldb_libleveldb_a-comparator.o
  CXX      leveldb/util/leveldb_libleveldb_a-crc32c.o
  CXX      leveldb/util/leveldb_libleveldb_a-env.o
  CXX      leveldb/util/leveldb_libleveldb_a-env_posix.o
  CXX      leveldb/util/leveldb_libleveldb_a-filter_policy.o
  CXX      leveldb/util/leveldb_libleveldb_a-hash.o
  CXX      leveldb/util/leveldb_libleveldb_a-histogram.o
  CXX      leveldb/util/leveldb_libleveldb_a-logging.o
  CXX      leveldb/util/leveldb_libleveldb_a-options.o
  CXX      leveldb/util/leveldb_libleveldb_a-status.o
  CXX      leveldb/port/leveldb_libleveldb_a-port_posix.o
  CXX      leveldb/helpers/memenv/leveldb_libmemenv_a-memenv.o
  CXX      groestlcoin_cli-groestlcoin-cli.o
  CXX      rpc/libgroestlcoin_cli_a-client.o
  CXX      groestlcoin_tx-groestlcoin-tx.o
  CXXLD    libgroestlcoinconsensus.la
  AR       libgroestlcoin_server.a
/usr/bin/ar: `u' modifier ignored since `D' is the default (see `U')
/usr/bin/ar: `u' modifier ignored since `D' is the default (see `U')
  AR       libgroestlcoin_common.a
  CXX      libgroestlcoin_util_a-clientversion.o
/usr/bin/ar: `u' modifier ignored since `D' is the default (see `U')
  AR       libgroestlcoin_zmq.a
/usr/bin/ar: `u' modifier ignored since `D' is the default (see `U')
  AR       libgroestlcoin_consensus.a
/usr/bin/ar: `u' modifier ignored since `D' is the default (see `U')
  AR       crypto/libgroestlcoin_crypto.a
/usr/bin/ar: `u' modifier ignored since `D' is the default (see `U')
  AR       leveldb/libleveldb.a
/usr/bin/ar: `u' modifier ignored since `D' is the default (see `U')
  AR       leveldb/libmemenv.a
/usr/bin/ar: `u' modifier ignored since `D' is the default (see `U')
  AR       libgroestlcoin_util.a
/usr/bin/ar: `u' modifier ignored since `D' is the default (see `U')
  AR       libgroestlcoin_cli.a
/usr/bin/ar: `u' modifier ignored since `D' is the default (see `U')
  CXXLD    groestlcoin-cli
  AR       libgroestlcoin_wallet.a
/usr/bin/ar: `u' modifier ignored since `D' is the default (see `U')
  CXXLD    groestlcoind
  CXXLD    groestlcoin-tx
make[2]: Leaving directory '/home/ubuntu/groestlcoin/src'
make[1]: Leaving directory '/home/ubuntu/groestlcoin/src'
Making all in doc/man
make[1]: Entering directory '/home/ubuntu/groestlcoin/doc/man'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/ubuntu/groestlcoin/doc/man'
make[1]: Entering directory '/home/ubuntu/groestlcoin'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/ubuntu/groestlcoin'
srv@local:~/groestlcoin$ make install
Making install in src
make[1]: Entering directory '/home/ubuntu/groestlcoin/src'
make[2]: Entering directory '/home/ubuntu/groestlcoin/src'
make[3]: Entering directory '/home/ubuntu/groestlcoin/src'
 /bin/mkdir -p '/home/ubuntu/groestlcoin-core/lib'
 /bin/bash ../libtool   --mode=install /usr/bin/install -c   libgroestlcoinconsensus.la '/home/ubuntu/groestlcoin-core/lib'
libtool: install: /usr/bin/install -c .libs/libgroestlcoinconsensus.so.0.0.0 /home/ubuntu/groestlcoin-core/lib/libgroestlcoinconsensus.so.0.0.0
libtool: install: (cd /home/ubuntu/groestlcoin-core/lib && { ln -s -f libgroestlcoinconsensus.so.0.0.0 libgroestlcoinconsensus.so.0 || { rm -f libgroestlcoinconsensus.so.0 && ln -s libgroestlcoinconsensus.so.0.0.0 libgroestlcoinconsensus.so.0; }; })
libtool: install: (cd /home/ubuntu/groestlcoin-core/lib && { ln -s -f libgroestlcoinconsensus.so.0.0.0 libgroestlcoinconsensus.so || { rm -f libgroestlcoinconsensus.so && ln -s libgroestlcoinconsensus.so.0.0.0 libgroestlcoinconsensus.so; }; })
libtool: install: /usr/bin/install -c .libs/libgroestlcoinconsensus.lai /home/ubuntu/groestlcoin-core/lib/libgroestlcoinconsensus.la
libtool: install: /usr/bin/install -c .libs/libgroestlcoinconsensus.a /home/ubuntu/groestlcoin-core/lib/libgroestlcoinconsensus.a
libtool: install: chmod 644 /home/ubuntu/groestlcoin-core/lib/libgroestlcoinconsensus.a
libtool: install: /usr/bin/ranlib /home/ubuntu/groestlcoin-core/lib/libgroestlcoinconsensus.a
libtool: finish: PATH="/home/ubuntu/bin:/home/ubuntu/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/sbin" ldconfig -n /home/ubuntu/groestlcoin-core/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /home/ubuntu/groestlcoin-core/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the 'LD_RUN_PATH' environment variable
     during linking
   - use the ' -D__LIBTOOL_IS_A_FOOL__ ' linker flag
   - have your system administrator add LIBDIR to '/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
 /bin/mkdir -p '/home/ubuntu/groestlcoin-core/bin'
  /bin/bash ../libtool   --mode=install /usr/bin/install -c groestlcoind groestlcoin-cli groestlcoin-tx '/home/ubuntu/groestlcoin-core/bin'
libtool: install: /usr/bin/install -c groestlcoind /home/ubuntu/groestlcoin-core/bin/groestlcoind
libtool: install: /usr/bin/install -c groestlcoin-cli /home/ubuntu/groestlcoin-core/bin/groestlcoin-cli
libtool: install: /usr/bin/install -c groestlcoin-tx /home/ubuntu/groestlcoin-core/bin/groestlcoin-tx
 /bin/mkdir -p '/home/ubuntu/groestlcoin-core/include'
 /usr/bin/install -c -m 644 script/groestlcoinconsensus.h '/home/ubuntu/groestlcoin-core/include'
make[3]: Leaving directory '/home/ubuntu/groestlcoin/src'
make[2]: Leaving directory '/home/ubuntu/groestlcoin/src'
make[1]: Leaving directory '/home/ubuntu/groestlcoin/src'
Making install in doc/man
make[1]: Entering directory '/home/ubuntu/groestlcoin/doc/man'
make[2]: Entering directory '/home/ubuntu/groestlcoin/doc/man'
make[2]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/ubuntu/groestlcoin-core/share/man/man1'
 /usr/bin/install -c -m 644 bitcoind.1 bitcoin-qt.1 bitcoin-cli.1 bitcoin-tx.1 '/home/ubuntu/groestlcoin-core/share/man/man1'
make[2]: Leaving directory '/home/ubuntu/groestlcoin/doc/man'
make[1]: Leaving directory '/home/ubuntu/groestlcoin/doc/man'
make[1]: Entering directory '/home/ubuntu/groestlcoin'
make[2]: Entering directory '/home/ubuntu/groestlcoin'
make[2]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/home/ubuntu/groestlcoin-core/lib/pkgconfig'
 /usr/bin/install -c -m 644 libgroestlcoinconsensus.pc '/home/ubuntu/groestlcoin-core/lib/pkgconfig'
make[2]: Leaving directory '/home/ubuntu/groestlcoin'
make[1]: Leaving directory '/home/ubuntu/groestlcoin'
srv@local:~/groestlcoin$ cd ../groestlcoin-core/bin/
srv@local:~/groestlcoin-core/bin$ ls
groestlcoin-cli  groestlcoind  groestlcoin-tx